[PSUBS-MAILIST] metric to standard

[Alan via Personal_Submersibles]

Rick,
are you sure that's not what they are calculating there bar rating on;
ie. 15 or 30 bar on a cable diameter the same as what you are using!
Are you still going to go with the blueglobe either side?
Alan

> On 12/06/2020, at 12:06 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hey Brian
> 
> I finally got ahold of the Blue Globe rep located in New Jersey and he told me that for what I wanted, a fitting that would take the 600' of pressure that I wanted, I would have to move up to their 30 bar fittings and those are only metric so that might be the same reason that you are asking?? I was at first bummed that I had purchased 10 subcon fittings that only had a rating for 15 bar but then I did the math on the actual opening the wire would be going threw and it was only about 33 pound of push so mine will be fine.  Sometimes I get tunnel vision.
> Rick
> 
> 
>> On Thu, Jun 11, 2020 at 12:03 PM Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> All,
>>                    Is it possible to get a metric to stainless pipe thread coupling ?        Seems Blue globe is the only cable gland option.
>> 
>> Brian
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200612/9338deb4/attachment.html>