[PSUBS-MAILIST] metric to standard

[Rick Patton via Personal_Submersibles]

Hey Brian

I finally got ahold of the Blue Globe rep located in New Jersey and he told
me that for what I wanted, a fitting that would take the 600' of pressure
that I wanted, I would have to move up to their 30 bar fittings and those
are only metric so that might be the same reason that you are asking?? I
was at first bummed that I had purchased 10 subcon fittings that only had a
rating for 15 bar but then I did the math on the actual opening the wire
would be going threw and it was only about 33 pound of push so mine will be
fine.  Sometimes I get tunnel vision.
Rick


On Thu, Jun 11, 2020 at 12:03 PM Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> All,
>                    Is it possible to get a metric to stainless pipe thread
> coupling ?        Seems Blue globe is the only cable gland option.
>
> Brian
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200611/10416dd1/attachment.html>