[PSUBS-MAILIST] attaching wires

[Rick Patton via Personal_Submersibles]

Hi Alec,

I am actually using them for attaching tube as it passes the frames thanks
to someones input on this site a while ago. I have about 4 things in the
Conn that are mounted up close to the flange and I need to run those wires
down until they can run horizontally along the top of the hull to the
buss's. I just found some small plastic adhesive hooks on line that will
work though I will probably use gorilla glue for each one as I doubt the
adhesive is very good coming from China.
Rick

On Sun, May 13, 2018 at 1:43 AM, Alec Smyth via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> There are some little aluminum safety locks for sliding doors that attach
> nicely to the stiffener flanges. I replaced the hand screws for set screws
> and drilled a hole to attach the wiring harness with a cable tie.
>
> https://goo.gl/images/tbmWNs
>
>
> Best,
> Alec
>
> On Sat, May 12, 2018 at 6:55 PM, Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> I am running wires all over the place and was wondering how people are
>> securing their wires to the hull. I have welded a couple of small stainless
>> steel eyes to tie wire to but a real pain.
>>  I also would rather not drill any holes into my T bar frames. I was
>> wondering if I could find small plastic eyes with adhesive on them if they
>> would stay stuck to paint for a long time??
>>
>> Rick
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180513/cebc1d97/attachment.html>