[PSUBS-MAILIST] attaching wires

[Alec Smyth via Personal_Submersibles]

Actually its this one... https://goo.gl/images/xHqDhS

On Sun, May 13, 2018 at 7:43 AM, Alec Smyth <alecsmyth at gmail.com> wrote:

> There are some little aluminum safety locks for sliding doors that attach
> nicely to the stiffener flanges. I replaced the hand screws for set screws
> and drilled a hole to attach the wiring harness with a cable tie.
>
> https://goo.gl/images/tbmWNs
>
>
> Best,
> Alec
>
> On Sat, May 12, 2018 at 6:55 PM, Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> I am running wires all over the place and was wondering how people are
>> securing their wires to the hull. I have welded a couple of small stainless
>> steel eyes to tie wire to but a real pain.
>>  I also would rather not drill any holes into my T bar frames. I was
>> wondering if I could find small plastic eyes with adhesive on them if they
>> would stay stuck to paint for a long time??
>>
>> Rick
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180513/10888b09/attachment.html>