[PSUBS-MAILIST] plug connector

[Alan via Personal_Submersibles]

Hi Hank,
not quite following what you are doing.
How come only one wire needs to disconnect?
Do you mean the occupancy sphere or the escape pod?
There are pull apart connectors that have high amps running through them
that they use in the RC World. If you google 5 or 6mm gold connectors you 
are bound to find them. 
I wonder if it would be better to connect them, & coat them in some sort of
grease & shrink tube over the connection. This would waterproof them, 
stop stray current & still leave them able to pull apart if there is enough force 
to tear the shrink tubing apart.
Alan


> On 28/12/2018, at 12:09 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All, I have to make a 50 amp connector with two pins that will pull apart when the occupant sphere section separates (jettisons)  I use flat trailer plug connectors for all the small stuff.  I grease them up with silicone grease and it has worked perfectly on Gamma.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181228/45188e04/attachment.html>