[PSUBS-MAILIST] Removable tru hulls

[via Personal_Submersibles]

It's not hard to do that. You put the quick disconnects out near the arm release point and whatever disconnects it, also disconnects the hydraulics. Personally, I'd rather have extra viewports on either side of the big window. I do know that you have to avoid compromising the knuckle where the head transitions from cylinder to ellipse. 
Vance



-----Original Message-----
From: swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Fri, Jan 16, 2015 9:33 am
Subject: Re: [PSUBS-MAILIST] Removable tru hulls



Vance,
They are 7", but I wanted to put them somewhat close to my main veiwport which has a fairly big tru hull of I believe 20" ( I would have to measure to confirm). The reasoning for this is I am making the control with sub cons so if I disconnect the arm and pull straight back, the plugs will disconnect. If I have to put the removeable 7" plate on the side of the sub, I would have to find some way to put everything at a 90°.
Thanks,
Scott Waters





Sent from my U.S. Cellular® Smartphone



-------- Original message --------
From: via Personal_Submersibles  
Date:01/16/2015  8:17 AM  (GMT-06:00) 
To: personal_submersibles at psubs.org 
Subject: Re: [PSUBS-MAILIST] Removable tru hulls 

Scott,
Not sure about the engineering, but George told me that if things were about a diameter apart, then they would be okay. Maybe one of the guys will crunch the numbers. How big are these penetrators going to be?
Vance



-----Original Message-----
From: swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org>
To: psubs <personal_submersibles at psubs.org>
Sent: Fri, Jan 16, 2015 9:01 am
Subject: [PSUBS-MAILIST] Removable tru hulls



I am putting two removeable tru hulls in Trustworthy (same as Alec) for my manipulator arms. I want to put them close to the front veiw port of the sub. I know if I get to close to the front veiw port it hurts the structure. How close can I get to it and still not hurt the structure?
Thanks,
Scott Waters





Sent from my U.S. Cellular® Smartphone



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150116/6014e50d/attachment-0001.html>