[PSUBS-MAILIST] Removable tru hulls

[swaters@waters-ks.com via Personal_Submersibles]

Vance,
They are 7", but I wanted to put them somewhat close to my main veiwport which has a fairly big tru hull of I believe 20" ( I would have to measure to confirm). The reasoning for this is I am making the control with sub cons so if I disconnect the arm and pull straight back, the plugs will disconnect. If I have to put the removeable 7" plate on the side of the sub, I would have to find some way to put everything at a 90°.
Thanks,
Scott Waters


Sent from my U.S. Cellular® Smartphone


-------- Original message --------
From: via Personal_Submersibles <personal_submersibles at psubs.org> 
Date:01/16/2015  8:17 AM  (GMT-06:00) 
To: personal_submersibles at psubs.org 
Subject: Re: [PSUBS-MAILIST] Removable tru hulls 

Scott,
Not sure about the engineering, but George told me that if things were about a diameter apart, then they would be okay. Maybe one of the guys will crunch the numbers. How big are these penetrators going to be?
Vance


-----Original Message-----
From: swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org>
To: psubs <personal_submersibles at psubs.org>
Sent: Fri, Jan 16, 2015 9:01 am
Subject: [PSUBS-MAILIST] Removable tru hulls

I am putting two removeable tru hulls in Trustworthy (same as Alec) for my manipulator arms. I want to put them close to the front veiw port of the sub. I know if I get to close to the front veiw port it hurts the structure. How close can I get to it and still not hurt the structure?
Thanks,
Scott Waters


Sent from my U.S. Cellular® Smartphone
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150116/2feb9225/attachment.html>