[PSUBS-MAILIST] Lifting I beam

[swaters via Personal_Submersibles]

Thanks Dan!
-Scott Waters




Sent from my U.S. Cellular© Smartphone"Dan H. via Personal_Submersibles" <personal_submersibles at psubs.org> wrote:The beam I used wasn't calculated.  It was just something I had laying around and looked heavy enough to do the job. 
It's a 3 X 5.7 S beam.  That's three inches high, weighing 5.7 pounds per foot, Standard I beam. 
It's 2.33 inches wide.  It works fine. 
 
Dan Hryhorcoff
----- Original Message -----
From: via Personal_Submersibles
To: personal_submersibles at psubs.org
Sent: Friday, May 23, 2014 11:25 AM
Subject: Re: [PSUBS-MAILIST] Lifting I beam

Good question. I've got low overhead in the garage, and that would be a very nice addition to my moving-the-sub gear.
Vance


-----Original Message-----
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: psubs <personal_submersibles at psubs.org>
Sent: Fri, May 23, 2014 11:17 am
Subject: [PSUBS-MAILIST] Lifting I beam

What size I beam should I use for lifting the K-350? I am talking about the same thing Dan Hryhorcoff used in his picture with the crane picking up Persistence.
 

 
Thanks,
Scott Waters
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140523/b603e984/attachment.html>