[PSUBS-MAILIST] Lifting I beam

[Dan H. via Personal_Submersibles]

The beam I used wasn't calculated.  It was just something I had laying around and looked heavy enough to do the job.  
It's a 3 X 5.7 S beam.  That's three inches high, weighing 5.7 pounds per foot, Standard I beam.  
It's 2.33 inches wide.  It works fine.  

Dan Hryhorcoff
  ----- Original Message ----- 
  From: via Personal_Submersibles 
  To: personal_submersibles at psubs.org 
  Sent: Friday, May 23, 2014 11:25 AM
  Subject: Re: [PSUBS-MAILIST] Lifting I beam


  Good question. I've got low overhead in the garage, and that would be a very nice addition to my moving-the-sub gear. 
  Vance



  -----Original Message-----
  From: via Personal_Submersibles <personal_submersibles at psubs.org>
  To: psubs <personal_submersibles at psubs.org>
  Sent: Fri, May 23, 2014 11:17 am
  Subject: [PSUBS-MAILIST] Lifting I beam


  What size I beam should I use for lifting the K-350? I am talking about the same thing Dan Hryhorcoff used in his picture with the crane picking up Persistence.



  Thanks,
  Scott Waters
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


------------------------------------------------------------------------------


  _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140523/a1c232ac/attachment.html>