<p dir="ltr">Apart from the heat issue with epoxy it also has a shrinkage factor to consider that could affect its ability to bond to all of the surfaces in the light... Has anyone considered Dielectric silicone for this application?</p>
<br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Sat, 22 Feb 2025, 10:43 am Jon Wallace via Personal_Submersibles, <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>                Just finished testing a second LED light which I filled with epoxy only enough to cover the diodes and other electronics.  My light meter shows a 10% output increase over the fully filled unit, however to my eye the two appear almost exactly the same.  Both units utilize the reflectors that came with them.<br><br>Here's the link again to the brand/model I have tested.<br><a href="https://tigerlights.com/products/50w-compact-led-flood-light-generation-2-tl500f/" target="_blank" rel="noreferrer">https://tigerlights.com/products/50w-compact-led-flood-light-generation-2-tl500f/</a><br><br>Jon            </div>            _______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="noreferrer">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>