<html><head></head><body><div class="ydpe4d9f458yahoo-style-wrap" style="font-family: times new roman, new york, times, serif; font-size: 16px;"><div></div>
<div dir="ltr" data-setdir="false">Alan, if you are asking for an OTS rating, it's rated for the depth of it's intended purpose. See link to document, below. For the STX-101, that's 35 feet because the standard cable length is 35 feet long. For the SSB-2010 it's 300 feet because that's about the limit for deep technical diving. You can see from the chart that the transducer with 55 foot cable is rated for 55 feet, and the one with 100 foot cable is rated for 100 feet. These ratings make sense from a marketing perspective but I have no concern that these are even close to actual failure depths. For example, Cliff gave the R-300 a 400 foot unmanned depth test in Lake Tahoe with his OTS transducer attached. Surface unit performance is going to be negatively affected by signal loss and potential electromagnetic reflections in the cable just like any transceiver/antenna system which is why you won't see a 1000 or 2000 foot cable option. The transducer units appear to be solidly potted and I suspect their failure depth is "deep". Certainly, I think there's no issue with it installed on any K-boat.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><a href="https://www.oceantechnologysystems.com/wp-content/uploads/2019/08/OTS-Catalog52019-small.pdf" rel="nofollow" target="_blank">https://www.oceantechnologysystems.com/wp-content/uploads/2019/08/OTS-Catalog52019-small.pdf</a><br></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Jon</div><div dir="ltr" data-setdir="false"><br></div><div><br></div>
</div><div id="ydp8be3bf55yahoo_quoted_6719412610" class="ydp8be3bf55yahoo_quoted">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div>
On Friday, November 20, 2020, 11:17:35 PM EST, Alan James via Personal_Submersibles <personal_submersibles@psubs.org> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div id="ydp8be3bf55yiv2790227783"><div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:16px;"><div></div>
<div>Thanks Jon, </div><div>do you know the depth rating for the XTS-101transducer. If its designed as a top side module I am wondering whether the transducer is not as robust as the divers transducer. I have seen that you can purchase a 100ft extension cable for it, so it can at least go that depth. </div><div>Alan</div><div><br clear="none"></div>
<div class="ydp8be3bf55yiv2790227783ydp67d76a6dyahoo_quoted" id="ydp8be3bf55yiv2790227783ydp67d76a6dyahoo_quoted_5965828491">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div class="ydp8be3bf55yiv2790227783yqt7595770848" id="ydp8be3bf55yiv2790227783yqt76118"><div>
On Saturday, November 21, 2020, 03:37:51 PM GMT+13, Jon Wallace via Personal_Submersibles <personal_submersibles@psubs.org> wrote:
</div>
<div><br clear="none"></div>
<div><br clear="none"></div>
<div><div id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279"><div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpec7213b0yahoo-style-wrap" style="font-family:times new roman, new york, times, serif;font-size:16px;"><div></div>
<div dir="ltr">Alan, don't know, but I will certainly look into it. Sounds like it could be as simple as a junction box that accepts VHF and UWC inputs, and a toggle switch to select the appropriate radio. Nyutco modified his headset to use two boom mics, one for VHF the other for UWC. I don't remember how we switched between the two transceivers though. Maybe someone else does.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">The STX-101 will be easy to modify for off-the-shelf headsets. It uses a separate banana-clip jack for headset and microphone so there should be no cutting of wires necessary. The SSB-2010 is going to be more of a hassle because it will require cutting and splicing their stock wire adapter.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">Jon</div><div dir="ltr"><br clear="none"></div><div><br clear="none"></div>
</div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyahoo_quoted" id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyahoo_quoted_6372464434">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279yqt3924026087" id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279yqtfd44111"><div>
On Friday, November 20, 2020, 01:07:14 PM EST, Alan James via Personal_Submersibles <personal_submersibles@psubs.org> wrote:
</div>
<div><br clear="none"></div>
<div><br clear="none"></div>
<div><div id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228"><div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228ydp4aa5570ayahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:16px;"><div></div>
<div>Some great thoughts here. </div><div>Jon, are you going to incorporate topside </div><div>Communication through the headset in your design? Looking forward to seeing what you come up with! </div><div>I like the idea of the push button on the controls. </div><div>Alan</div><div><br clear="none"></div>
<div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228ydp4aa5570ayahoo_quoted" id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228ydp4aa5570ayahoo_quoted_6157203276">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228yqt4572996849" id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279ydpe9e92cefyiv5692195228yqt97633"><div><br clear="none"></div></div></div></div></div></div></div></div>
</div></div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279yqt3924026087" id="ydp8be3bf55yiv2790227783ydp67d76a6dyiv0331765279yqtfd52098">
</div></div></div></div><div class="ydp8be3bf55yiv2790227783ydp67d76a6dyqt3924026087" id="ydp8be3bf55yiv2790227783ydp67d76a6dyqtfd55437">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a shape="rect" href="mailto:Personal_Submersibles@psubs.org" rel="nofollow" target="_blank">Personal_Submersibles@psubs.org</a><br clear="none"><a shape="rect" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div></div></div>
</div>
</div></div></div></div><div class="ydp8be3bf55yqt7595770848" id="ydp8be3bf55yqt00918">_______________________________________________<br clear="none">Personal_Submersibles mailing list<br clear="none"><a shape="rect" href="mailto:Personal_Submersibles@psubs.org" rel="nofollow" target="_blank">Personal_Submersibles@psubs.org</a><br clear="none"><a shape="rect" href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br clear="none"></div></div>
</div>
</div></body></html>