<div dir="auto">Styrofoam is the problem, the timber is quite easy to surface and achieve a reasonable finish to mold from, i often make temporary molds from custom wood and brush on between 5 and 8 layers of polyester resin which in warm weather is usually achieved in a day, once cured i sand, polish and wax up... styro foam however is not going to like polyester at all... you could use the same method as i have discribed but coat the foam, and the ply for that matter with an epoxy resin then transition to a polyester by first coating the initial few coats of epoxy with a couple of coats of vinyl easter resin, this allows you to carry on with cheaper poly easter which is easier to sand etc. Or you could do the whole coating process with epoxy, i just find polyester easier to work and a lot cheaper.<div dir="auto"><br></div><div dir="auto">The other option is coating the foam with tape to get a rough part off then clean that up to get a mold proper...</div><div dir="auto"><br></div><div dir="auto">Mike.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, 1 Sep. 2020, 12:04 am Philippe Robert via Personal_Submersibles, <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><span lang="EN-US" style="font-size:12pt"><font face="arial, sans-serif">Hi David,</font></span></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><span lang="EN-US" style="font-size:12pt"><font face="arial, sans-serif"> </font></span></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><font face="arial, sans-serif"><span lang="EN-US" style="font-size:12pt;color:rgb(68,68,68)">I'm looking to make a mold with plywood and foam. I have a good idea how to make It, but no idea how to have a good finish on it</span><span lang="EN-US" style="font-size:12pt">.</span></font></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><font face="arial, sans-serif"><span lang="EN-US" style="font-size:12pt;color:rgb(68,68,68)">I'm wondering what product to use to cover the Styrofoam and wood of the mold, I don't want the fiberglass sticking to my mold. </span></font></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><font face="arial, sans-serif"><span style="font-size:12pt"><br></span></font></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><font face="arial, sans-serif"><span style="font-size:12pt">Regards</span></font></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><span style="font-size:12pt"><font face="arial, sans-serif"> </font></span></p><p class="MsoNormal" style="margin:0cm;line-height:normal;font-size:11pt"><span lang="EN-US" style="font-size:12pt"><span style="font-size:12pt"><font face="arial, sans-serif">Philippe</font></span><br></span></p></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Le dim. 30 août 2020 à 15:31, David Colombo via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank" rel="noreferrer">personal_submersibles@psubs.org</a>> a écrit :<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Hi Philippe, Are you looking to make the mold as a plug or a one off part. Let me know and I can give you some tips.</div><div><br></div><div><div><div><div dir="ltr"><div dir="ltr"><div>Best Regards,<br>David Colombo<br><img src="http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w" width="200" height="110"><br>804 College Ave<br>Santa Rosa, CA. 95404<br>(707) 536-1424<br><a href="http://www.SeaQuestor.com" target="_blank" rel="noreferrer">www.SeaQuestor.com</a><br><br></div></div></div></div><br></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Aug 30, 2020 at 9:42 AM Philippe Robert via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank" rel="noreferrer">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hi all,<div><br></div><div>I would like to know if someone has experience in fiberglass making. I am looking for a starting point for making a kind of mold to construct the mbt. Have never work with fiberglass before.</div><div><br></div><div>Regards</div><div><br></div><div>Philippe</div></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="noreferrer">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="noreferrer">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank" rel="noreferrer">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>