<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">Brian. That is pretty clever.<div>Hank<br><br><div dir="ltr">Sent from my iPhone</div><div dir="ltr"><br><blockquote type="cite">On Jul 7, 2020, at 9:22 AM, Brian Cox via Personal_Submersibles <personal_submersibles@psubs.org> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div style="font-family:Arial, sans-serif; font-size:10pt;"><font size="2" style=""><font face="Arial, sans-serif">I'm working on a compensator that has a couple of stages to it . It will have an extra oil side reservoir , then go to the main reservoir. It will be open to the seawater but it will be filled with water ahead of time. It will be similar to my current compensator except there will be a water and oil reservoir where the oil will be floating on top of the water and a tube going down into the water which will allow pressure to push the air from the open tube in and out as the sub is at depth or on the surface. I'll have to make a picture ;-) </font></font><div><font face="Arial, sans-serif" size="2"><br></font></div><div><font face="Arial, sans-serif" size="2">Brian</font></div><div><font face="Arial, sans-serif" size="2"><br></font></div><div><font face="Arial, sans-serif" size="2"><br></font><br><span style="font-family: Arial, sans-serif; font-size: 10pt;">--- personal_submersibles@psubs.org wrote:</span><br><br><span style="font-family: Arial, sans-serif; font-size: 10pt;">From: Alan via Personal_Submersibles <personal_submersibles@psubs.org></span><br><span style="font-family: Arial, sans-serif; font-size: 10pt;">To: Personal Submersibles General Discussion <personal_submersibles@psubs.org></span><br><span style="font-family: Arial, sans-serif; font-size: 10pt;">Subject: Re: [PSUBS-MAILIST] Yet another compensator method</span><br><span style="font-family: Arial, sans-serif; font-size: 10pt;">Date: Tue, 7 Jul 2020 10:55:29 +1200</span><br><br><div style="font-family: Arial, sans-serif; font-size: 10pt;"></div><div style="font-family: Arial, sans-serif; font-size: 10pt;">Vance,</div><div style="font-family: Arial, sans-serif; font-size: 10pt;">did those compensated motors have an attached or built in compensator </div><div style="font-family: Arial, sans-serif; font-size: 10pt;">to over-pressurise them?</div><div style="font-family: Arial, sans-serif; font-size: 10pt;">Am wondering where the oil was getting out / water was getting in, was it just </div><div style="font-family: Arial, sans-serif; font-size: 10pt;">running out through the shaft seals?</div><div style="font-family: Arial, sans-serif; font-size: 10pt;">Cheers Alan</div><div style="font-family: Arial, sans-serif; font-size: 10pt;"><br>On 7/07/2020, at 9:12 AM, via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br><br></div><blockquote style="font-family: Arial, sans-serif; font-size: 10pt;"><div>
<div style="color:black;font: 12pt Arial, Helvetica, sans-serif;">
<div style="font-family:helvetica,arial;font-size:10pt;color:black">
<div>
<div>
<div style="color:black;font:12pt Arial, Helvetica, sans-serif;">The all-the-air thing is engineer speak for mostly-kinda-sorta-all-the-air
<div><br>
</div>
<div>My experience with the compensated Hyco built Hymak motors says that the only time you get all the air out is when it's an accident. And even if you started out that way, we were likely to have a little air when we got back, mostly from internal turbulence and the minor brush arcing that got worse as we went deeper.</div>
<div><br>
</div>
<div>Meaning that checking for salt water intrusion and topping up the oil in a Hymak was done after EVERY dive, even on Aquarius in the Gulf of Mexico, where we were only diving in the 200-300 foot range.</div>
<div><br>
</div>
<div>Those little air bubbles are just part of the cost of doing business. They were why we bought compensating oil in 55 gallon drums.</div>
<div><br>
</div>
<div>The cool thing with the Hymaks was that the whole process took about two minutes.</div>
<div><br>
<div>Vance<br>
<br>
<br>
<div style="font-family:helvetica, arial;font-size:10pt;color:black;">-----Original Message-----<br>
From: Rick Patton via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>><br>
To: Personal Submersibles General Discussion <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>><br>
Sent: Mon, Jul 6, 2020 2:15 pm<br>
Subject: Re: [PSUBS-MAILIST] Yet another compensator method<br>
<br>
<div>
<div>
<div>
<div dir="ltr">I have always heard from the group that it was imperative to get ALL the air out due to the compression difference between air and liquid so I will be using small IV bags attached to the housing that I found on line that are only about 3" square and my plan was to exhaust all of the air out of the housing and the bag as well with the bag having just a very small quantity of oil in it to feed the housing if needed but the bag would easily inflate with the expanding oil as needed as it is very flexible. Haven't gotten that far yet but that was what I came up with when I was trying to go to sleep one night. This way I never have any compressible gas in the system yet have a bladder that flexes easily with hot oil and visa versa. Open to suggestions??
<div>Rick</div>
</div>
<br>
<div>
<div>
<div dir="ltr">On Mon, Jul 6, 2020 at 7:36 AM Brian Cox via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div>
<blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex;">
<div style="font-family:Arial, sans-serif;font-size:10pt;"><font size="2">I think a way to simply leave it open should be figured out. </font>
<div><font size="2"><br></font></div>
<div><font size="2">Brian</font></div>
<div><font size="2"><br></font></div>
<div><font size="2"><br></font><br><span style="font-size:10pt;">--- <a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a> wrote:</span><br><br><span style="font-size:10pt;">From: Alec Smyth via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>></span><br><span style="font-size:10pt;">To: Personal Submersibles General Discussion <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>></span><br><span style="font-size:10pt;">Subject: Re: [PSUBS-MAILIST] Yet another compensator method</span><br><span style="font-size:10pt;">Date: Mon, 6 Jul 2020 13:15:52 -0400</span><br><br>
<div dir="ltr" style="font-size:10pt;">Sorry, my understanding is the exact opposite. Thermal expansion/contraction volumes of the oil are significant, but of much smaller magnitude than gas volume changes due to pressure if the amount of air in the system is not absolutely minimal. Lets say your air bubble was half the volume of the bellows, which is about what it looks like in the photo. If you go to 350 feet, you will be adding a little more than 10 atmospheres, so the bubble will only be about a tenth its original volume and the bellows will have to contract about 45%. I'm not saying it cannot, you might be just fine. But as you dive to your 350 feet, the water will also get cold, so the oil will contract too. Quantifying how much would depend on the temperature differential and the volume of oil. But my point is BOTH the air and the oil are contracting. If their deltas were in opposite directions, say with the air contracting and the oil expanding, then one could argue an air bubble absorbs the expansion. I did once do the math for thermal expansion/contraction on Snoopy's thrusters, and it made me switch from just using the coiled length of hose method to adopting what looks like the exact same bellows you have in the photo. I selected that bellows because it had a volume appropriate to the thermal expansion calculation. However, if you add the gas delta to that, I'm not sure the math would have still added up.
<div><br></div>
<div>And yes, filling these things with oil so there's no or minimal bubble is a REAL pain!</div>
<div><br></div>
<div><br></div>
<div>Best,<br>Alec</div>
</div>
<br>
<div style="font-size:10pt;">
<div dir="ltr">On Mon, Jul 6, 2020 at 10:29 AM James Frankland via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div>
<blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex;">
<div dir="ltr">The air bubble is for a few reasons.
<div><br></div>
<div>1. To allow easier expansion of the oil if required, even though its enclosed.</div>
<div>2. Seems impossible to completely eliminate it, so thought id go with it.</div>
<div>3. Some people said you should have a bubble last time i brought this up! </div>
<div><br></div>
<div><br></div>
</div>
<br>
<div>
<div dir="ltr">On Mon, 6 Jul 2020 at 15:16, Alec Smyth via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div>
<blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex;">
<div dir="ltr">Looks good to me, but why have an air bubble? I always tried like crazy to eliminate it, since that is what expands or contracts most.
<div><br></div>
<div>Thanks,<br>Alec</div>
</div>
<br>
<div>
<div dir="ltr">On Mon, Jul 6, 2020 at 10:00 AM hank pronk via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div>
<blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex;">
<div>
<div style="font-family:Helvetica, Arial, sans-serif;font-size:13px;">
<div></div>
<div dir="ltr">James, that looks great-the air bubble is good also. </div>
<div dir="ltr">Hank</div>
<div><br></div>
</div>
<div>
<div style="font-family:Helvetica, Arial, sans-serif;font-size:13px;color:rgb(38,40,42);">
<div>
On Monday, July 6, 2020, 7:31:46 AM MDT, James Frankland via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:
</div>
<div><br></div>
<div><br></div>
<div>
<div>
<div dir="ltr">Hi All
<div><br></div>
<div>Getting Jodie B ready for diving in the next week or so.</div>
<div>I have changed the motor compensator yet again as the last enclosed one didnt really have a proper flexible part and I think the oil expanded a bit over time and leaked out through the seals. Just a tiny bit, but enough to put some air back in the pipe.</div>
<div><br>Anyway, the new method is simply a tube with belows. These are from a toilet flush and have been sitting full of oil for a couple of weeks to see if anything happens. They seem good, so i have installed them. The motor is completely filled with oil and the bellows have a small amount of air. They compress easily, so should provide pressure compensation while also allowing the oil to expand if required.</div>
<div><br></div>
<div>The bellows will be covered with an open ended tube for protection. Just got to make a strap for those.</div>
<div><br></div>
<div>Any comments?<br>Thanks</div>
<div>James</div>
<div><br>
<div><20200704_142240.jpg><br></div>
</div>
</div>
</div>
_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div>
</div>
</div>
</div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
<span style="font-size:10pt;">
--00000000000093ffaf05a9c9074c--_______________________________________________
Personal_Submersibles mailing list
</span><a style="font-size:10pt;">Personal_Submersibles@psubs.org</a>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" style="font-size:10pt;">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a>
</div>
</div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
</div>
</div>
</div>
</div>
<div>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div></blockquote><blockquote style="font-family: Arial, sans-serif; font-size: 10pt;"><div><20200704_142240.jpg></div></blockquote><blockquote style="font-family: Arial, sans-serif; font-size: 10pt;"><div><span>_______________________________________________</span><br><span>Personal_Submersibles mailing list</span><br><span><a href="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</a></span><br><span><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a></span><br></div></blockquote><span style="font-family: Arial, sans-serif; font-size: 10pt;">_______________________________________________
Personal_Submersibles mailing list
</span><a href="/eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org" style="font-family: Arial, sans-serif; font-size: 10pt;">Personal_Submersibles@psubs.org</a>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" style="font-family: Arial, sans-serif; font-size: 10pt;">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a>
</div></div><span>_______________________________________________</span><br><span>Personal_Submersibles mailing list</span><br><span>Personal_Submersibles@psubs.org</span><br><span>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</span><br></div></blockquote></div></body></html>