<div dir="ltr">Ouch, I forgot you were in Hawaii. I actually can't recall what sort of jig I used because that little experiment was quite a few years ago. What I've been using in recent times is this:<div><br></div><div><a href="https://www.harborfreight.com/automotive/auto-body-trim/metalwork-tools/tubing-roller-99736.html">https://www.harborfreight.com/automotive/auto-body-trim/metalwork-tools/tubing-roller-99736.html</a> </div><div><br></div><div>I've been very happy with it, but it's not for small diameter work. What is it you're trying to make? <br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 15, 2020 at 1:49 AM Rick Patton via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Did you use a rose bud and was your jig something welded to the table like flat bar or steel tabs tacked to the table close together? that was what i was thinking of doing. I hate to send it to the East coast from Hawaii if I don't have to.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 14, 2020 at 5:49 PM Alec Smyth via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">It dimpled just like it had without sand. Its a well known technique, but there must be something more to it beyond than filling the pipe with sand and blocking the ends. <div><br></div><div>:)</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 14, 2020 at 11:28 PM Rick Patton via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Thanks Alec,<div>What happened when you tried it and did you have a good jig to bend it around?</div><div><br></div><div>Rick</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 14, 2020 at 5:13 PM Alec Smyth via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hi Rick,<div><br></div><div>I've attempted the sand technique with no luck. I do have a couple of simple bending machines, but if its something difficult there's an outfit in Maryland that does nothing but bending. I've used their services many times, and can't recommend them more highly. </div><div><br></div><div><a href="https://www.josephkavanaghco.com/" target="_blank">https://www.josephkavanaghco.com/</a> </div><div><br></div><div><br></div><div>Best,<br>Alec</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 14, 2020 at 10:52 PM Rick Patton via Personal_Submersibles <<a href="mailto:personal_submersibles@psubs.org" target="_blank">personal_submersibles@psubs.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">A reach out to the K-350 gang. Do any of you happen to know the total payload weight (two people) the boat is designed for with the MBT's and VBT flooded? <div>Also, has anyone hot bent SS tubing with sand im it in a tight radius before with good results? </div><div>I am going for a 25"/26" diameter.</div><div>Thanks</div><div>Hope all are doing OK with this friggin virus going around.</div><div>Rick<br><div><br></div></div></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>
_______________________________________________<br>
Personal_Submersibles mailing list<br>
<a href="mailto:Personal_Submersibles@psubs.org" target="_blank">Personal_Submersibles@psubs.org</a><br>
<a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="noreferrer" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br>
</blockquote></div>