<html><head></head><body><div class="ydp364fd67eyahoo-style-wrap" style="font-family: times new roman, new york, times, serif; font-size: 16px;"><div></div>
<div dir="ltr" data-setdir="false">Alan, the version of the pressure reducing - pressure relieving regulator I used on the R300 until recently was Watts Fluidair (Parker subsidiary )Model R364-02BSS/M1. It has a 0-60 psi range and a 300 psig max pressure.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Cliff</div><div><br></div>
</div><div id="ydp4bc0200eyahoo_quoted_1627017520" class="ydp4bc0200eyahoo_quoted">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div>
On Tuesday, October 15, 2019, 12:14:56 AM CDT, Alan via Personal_Submersibles <personal_submersibles@psubs.org> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div dir="ltr">Cliff & Alec,<br></div><div dir="ltr">I have just been playing around with my Parker miniature regulator.<br></div><div dir="ltr">As Alec noted there is quite a bit of pressure difference between the set<br></div><div dir="ltr">pressure & the relieving pressure. I have been turning the pressure up<br></div><div dir="ltr">to 20psi & then turning it down, & it takes a lot of turns to bring the pressure<br></div><div dir="ltr">down again. Ie. 1 full turn to go to 20psi but 2 full turns to drop pressure<br></div><div dir="ltr">back to zero.<br></div><div dir="ltr">I am using a cheaper Aluminium version for experimentation & bought the <br></div><div dir="ltr">0-125 psi range, which In hindsight was a mistake as I am not getting the <br></div><div dir="ltr">sensitivity I need.<br></div><div dir="ltr">What range did you guys buy. I see you can get 0-25 psi.<br></div><div dir="ltr">I am running my thruster full of silicone oil & just a few inches of air in the feeder<br></div><div dir="ltr">tube from the regulator. <br></div><div dir="ltr">Alan</div><br>_______________________________________________<br>Personal_Submersibles mailing list<br><a href="mailto:Personal_Submersibles@psubs.org" rel="nofollow" target="_blank">Personal_Submersibles@psubs.org</a><br><a href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" rel="nofollow" target="_blank">http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</a><br></div>
</div>
</div></body></html>