<html><head></head><body><div class="ydpa53233bbyahoo-style-wrap" style="font-family: times new roman, new york, times, serif; font-size: 16px;"><div></div>
<div dir="ltr" data-setdir="false">So, back to oil compensation of RoadShock LED fixture for a moment. It's been a little over a month since I tried using Marvel Mystery oil in this fixture. As you may recall, the oil seeped through the wiring and was leaking through the socket. I removed the oil and set the lamp aside for another time. </div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Yesterday I decided to poke around with it a little bit and see if I could remove the LED PCB from the housing as well as determine where exactly the oil seeping was occurring. When I set the unit aside a month ago I left a trace coating of oil in the housing since I just dumped out the bulk of it without thoroughly cleaning it. It turns out that the "lenses" attached to the LED (remember there are four of them) all popped off while I used a paper towel to absorb some of the remaining oil film that was in the unit. These lenses appear to be silicone. They are a soft spongy rubbery material that I can poke and indent with a small screwdriver, but recover to their original shape. Obviously translucent which is why I assume silicone. See attached photo.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">While the silicone itself seems unaffected by the oil, I'm assuming the oil affected whatever adhesive was used to attach the lens to the LED face. The light is still usable, just that what ever beam was created by the silicone lenses obviously isn't there anymore. Just a blob of white light, but frankly it doesn't look too much different than the pattern I saw with the lenses attached.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">I don't see any degradation in the wiring insulation at all that was exposed to the oil.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Alan, I don't know if you recall, there were two screws attaching the PCB to the aluminum housing and I thought perhaps that would allow easy removal of the PCB. It doesn't. I couldn't get the PCB to come out and assume it must also be expoxied to the housing in addition to the screws, or perhaps the screws are there as a grounding conduit? not sure...in any event I would have to destroy the PCB to get it out.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Anyway, thought this was interesting to post a follow up. My guess is that under working conditions these lenses would have eventually separated from the LED face and changed the light pattern.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Jon</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><br></div></div></body></html>