<html><head></head><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:12px"><div id="yui_3_16_0_ym19_1_1464695909279_3947">Hello Group,</div><div id="yui_3_16_0_ym19_1_1464695909279_3947" dir="ltr">I am also selling my acrylic cylinder assembly, I would cut it off the sub sphere so it would go with the 24 in dia collar that welds into the hull and the top ring that is 1 inch thickk 516-70 and the K350 hatch with internal \external opening feature. It would be a complete set up. The sub it is on was pressure tested to around 200 feet. The acrylic cylinder is 26in OD and 12 in tall and 1 in thick. </div><div id="yui_3_16_0_ym19_1_1464695909279_3947" dir="ltr">I can also cap the bottom opening and rig it up for a much deeper pressure test.</div><div id="yui_3_16_0_ym19_1_1464695909279_3947" dir="ltr">Message me at hankpronk@live.ca if interested</div><div id="yui_3_16_0_ym19_1_1464695909279_3947" dir="ltr">Hank</div></div></body></html>