<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body ><div>Not sure about yhe zinc coating. I used Macropoxy as the first coat and High solid poly as my second coat. I don't know if that helps, but it is what I did.</div><div>Thanks,</div><div>Scott Waters</div><div><br></div><div><br></div><div><div style="font-size:9px;color:#575757">Sent from my U.S. Cellular® Smartphone</div></div><div></div><br><br>-------- Original message --------<br>From: Brian Cox via Personal_Submersibles <personal_submersibles@psubs.org> <br>Date:04/30/2015 8:25 PM (GMT-06:00) <br>To: PSubs <personal_submersibles@psubs.org> <br>Cc: <br>Subject: [PSUBS-MAILIST] Zinc coating <br><br><div style="font-family:Arial, sans-serif; font-size:10pt;"><div>All,</div><div> </div><div>Ok, I was going to take my pressure hull ( it's finished , BTW) down and have an outfit zinc coat it but now I'm thinking that I should spend that money on a heavy duty air compressor and a sand blaster and do it myself. Since I'm sure I will need to be recoating places where I'm doing thru hulls and such. But my question is do I need to worry about the compatibility between the zinc coating and the epoxy that will on over the zinc ?? Should I put the zinc on the inside too ? Are there different types of zinc coatings? </div><div> </div><div>Brian</div></div>
</body></html>