<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body ><div>Hank I have two concerns about the HY-100. </div><div>1) Cost. Dan has told me in the past HY-100 or HY-80 is 3 time the price per pound than 516 gr 70. Not sure dollar wise what that will be</div><div>2) Welding process. Dan told me that this is very difficult to weld. You have to put it in a kiln to pre heat and weld inside it at 500 degrees. After that he said it still cracks and you have to gouge and reweld no matter how good a welder you are and you have to reweld it. </div><div><br></div><div>There is obviously alot of research I have to do to understand it first. </div><div><br></div><div>What is the supplier Hank?</div><div><br></div><div>Thanks,</div><div>Scott Waters</div><div><br></div><div><br></div><div><div style="font-size:9px;color:#575757">Sent from my U.S. Cellular® Smartphone</div></div><div></div><br><br>-------- Original message --------<br>From: hank pronk via Personal_Submersibles <personal_submersibles@psubs.org> <br>Date:01/08/2015 7:56 PM (GMT-06:00) <br>To: personal_submersibles@psubs.org <br>Subject: [PSUBS-MAILIST] Fw: <br><br>Scott,<br>I found HY-100 supplier with 1 ton min order<br>Hank<br><br>--- On Thu, 1/8/15, hank pronk <hankpronk@live.ca> wrote:<br><br>> From: hank pronk <hankpronk@live.ca><br>> Subject: <br>> To: "hanker_20032000@yahoo.ca" <hanker_20032000@yahoo.ca><br>> Received: Thursday, January 8, 2015, 8:54 PM<br>> <br>> <br>> <br>> <br>></body></html>