<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>I was considering doing the same thing, fabricating a test pot to take one
to failure just out of curiosity and piece of mind as well as test the rest to
600’ before installing them but figured it might me costly to do, so kind of
gave up the idea. Let us know your design with any pictures you may have of it
and an idea or your cost outlay if you don’t mind and would still like to do it
if feasible. I cringe at the idea of a port light failure on the sub when
testing and have to reel in a real heavy object full of sea water from 600’!!
Good luck and let us know how it went.</DIV>
<DIV> </DIV>
<DIV>Rick</DIV>
<DIV
style="FONT-SIZE: small; FONT-FAMILY: 'Calibri'; FONT-WEIGHT: normal; COLOR: #000000; FONT-STYLE: normal; TEXT-DECORATION: none; DISPLAY: inline">
<DIV style="FONT: 10pt tahoma">
<DIV> </DIV>
<DIV style="BACKGROUND: #f5f5f5">
<DIV style="font-color: black"><B>From:</B> <A title=hanker_20032000@yahoo.ca
href="mailto:hanker_20032000@yahoo.ca">hank pronk</A> </DIV>
<DIV><B>Sent:</B> Wednesday, October 30, 2013 2:49 PM</DIV>
<DIV><B>To:</B> <A title=personal_submersibles@psubs.org
href="mailto:personal_submersibles@psubs.org">Personal Submersibles General
Discussion</A> </DIV>
<DIV><B>Subject:</B> Re: [PSUBS-MAILIST] window test chamber</DIV></DIV></DIV>
<DIV> </DIV></DIV>
<DIV
style="FONT-SIZE: small; FONT-FAMILY: 'Calibri'; FONT-WEIGHT: normal; COLOR: #000000; FONT-STYLE: normal; TEXT-DECORATION: none; DISPLAY: inline">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif; COLOR: #000; BACKGROUND-COLOR: #fff">
<DIV style="RIGHT: auto"><SPAN style="RIGHT: auto">Rick,</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; RIGHT: auto; COLOR: rgb(0,0,0); FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN
style="RIGHT: auto">Thanks', your right, it will be much safer. I am only
testing to 1,000 feet, I don't think my chamber will handle a destruction
test.</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; RIGHT: auto; COLOR: rgb(0,0,0); FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN
style="RIGHT: auto">Hank<VAR id=yui-ie-cursor></VAR> </SPAN></DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV style="RIGHT: auto" dir=ltr>
<DIV class=hr
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; HEIGHT: 0px; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"
readonly="true"></DIV><FONT size=2 face=Arial><B><SPAN
style="FONT-WEIGHT: bold">From:</SPAN></B> Land N Sea
<landnsea1@hawaiiantel.net><BR><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> Personal Submersibles General
Discussion <personal_submersibles@psubs.org> <BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, October 30, 2013 6:37:15
PM<BR><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [PSUBS-MAILIST]
window test chamber<BR></FONT></DIV>
<DIV class=y_msg_container style="RIGHT: auto"><WBR>
<DIV id=yiv0198988423 style="RIGHT: auto">
<DIV style="RIGHT: auto" dir=ltr>
<DIV style="RIGHT: auto" dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Back in my diving days our company retested a couple of deck chambers and
they filled them completely with water leaving no air at all so if it ruptured,
there would be little or no bang. If you are testing it to failure then I guess
you would still need some air on the LP side so you are back to an air gap. Get
a long hose with the valve on your end and stand outside the building and peek
around the corner. </DIV>
<DIV> </DIV>
<DIV style="RIGHT: auto">Rick </DIV>
<DIV
style="FONT-SIZE: 13px; FONT-FAMILY: 'Calibri'; FONT-WEIGHT: normal; COLOR: #000000; FONT-STYLE: normal; TEXT-DECORATION: none; DISPLAY: inline">
<DIV style="FONT: 10pt tahoma">
<DIV style="RIGHT: auto"> </DIV>
<DIV id=yiv0198988423yqt57909 class=yiv0198988423yqt4536574842>
<DIV style="BACKGROUND: #f5f5f5">
<DIV><B>From:</B> <A title=hanker_20032000@yahoo.ca
href="mailto:hanker_20032000@yahoo.ca" shape=rect rel=nofollow target=_blank
ymailto="mailto:hanker_20032000@yahoo.ca">hank pronk</A> </DIV>
<DIV><B>Sent:</B> Wednesday, October 30, 2013 1:45 PM</DIV>
<DIV><B>To:</B> <A title=personal_submersibles@psubs.org
href="mailto:personal_submersibles@psubs.org" shape=rect rel=nofollow
target=_blank ymailto="mailto:personal_submersibles@psubs.org">Personal
Submersibles General Discussion</A> </DIV>
<DIV><B>Subject:</B> Re: [PSUBS-MAILIST] window test
chamber</DIV></DIV></DIV></DIV>
<DIV id=yiv0198988423yqt34804 class=yiv0198988423yqt4536574842>
<DIV> </DIV></DIV></DIV>
<DIV id=yiv0198988423yqt32161 class=yiv0198988423yqt4536574842>
<DIV
style="FONT-SIZE: small; FONT-FAMILY: 'Calibri'; FONT-WEIGHT: normal; COLOR: #000000; FONT-STYLE: normal; TEXT-DECORATION: none; DISPLAY: inline">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif; COLOR: #000; BACKGROUND-COLOR: #fff">
<DIV><SPAN>Today I built a window pressure test chamber. When the window
is in the chamber there is a small air space remaining. Should that space
be filled with water while the window is under pressure. The space is about
250ml.</SPAN></DIV>
<DIV><SPAN>Hank<VAR id=yiv0198988423yui-ie-cursor></VAR></SPAN></DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV dir=ltr>
<DIV class=yiv0198988423hr
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; HEIGHT: 0px; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
size=2 face=Arial><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> hank pronk
<hanker_20032000@yahoo.ca><BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> Personal Submersibles General
Discussion <personal_submersibles@psubs.org> <BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, October 30, 2013 10:53:07
AM<BR clear=none><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[PSUBS-MAILIST] Hatch mechanisms<BR clear=none></FONT></DIV>
<DIV class=yiv0198988423y_msg_container>
<DIV id=yiv0198988423>
<DIV>
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif; COLOR: #000; BACKGROUND-COLOR: #fff">
<DIV><SPAN>Since the force on the puller hub is directed outward in this
application, the loss of material for an oversize size rod should not
matter. </SPAN></DIV>
<DIV><SPAN>Hank<VAR id=yiv0198988423yui-ie-cursor></VAR></SPAN></DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV dir=ltr>
<DIV class=yiv0198988423hr
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; HEIGHT: 0px; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
size=2 face=Arial><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> Alec Smyth
<alecsmyth@gmail.com><BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> Personal Submersibles General
Discussion <personal_submersibles@psubs.org> <BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, October 30, 2013 9:31:43
AM<BR clear=none><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[PSUBS-MAILIST] Hatch mechanisms<BR clear=none></FONT></DIV>
<DIV class=yiv0198988423y_msg_container>
<DIV id=yiv0198988423>
<DIV>
<DIV dir=ltr>Can one drill out the puller thread and cut a new slightly larger
one in coarse thread?</DIV>
<DIV class=yiv0198988423gmail_extra>
<DIV class=yiv0198988423gmail_quote>On Wed, Oct 30, 2013 at 10:37 AM, hank pronk
<SPAN dir=ltr><<A href="mailto:hanker_20032000@yahoo.ca" shape=rect
rel=nofollow target=_blank
ymailto="mailto:hanker_20032000@yahoo.ca">hanker_20032000@yahoo.ca</A>></SPAN>
wrote:
<BLOCKQUOTE class=yiv0198988423gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<DIV id=yiv0198988423yqt74959 class=yiv0198988423yqt3742165237>
<DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV><SPAN>James,</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>It's
like the puller was made for it. Be aware though, with the fine thread
it is slow to unlatch. A real coarse thread, would be faster. My
original idea was to use a scissor jack threaded rod and nut.</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>Hank<VAR></VAR></SPAN></DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV dir=ltr>
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
face=Arial></FONT>
<DIV class=yiv0198988423im><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
James Frankland <<A href="mailto:jamesf@guernseysubmarine.com" shape=rect
rel=nofollow target=_blank
ymailto="mailto:jamesf@guernseysubmarine.com">jamesf@guernseysubmarine.com</A>><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> Personal Submersibles General
Discussion <<A href="mailto:personal_submersibles@psubs.org" shape=rect
rel=nofollow target=_blank
ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</A>>
</DIV><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Wednesday, October
30, 2013 7:52:05 AM
<DIV>
<DIV class=yiv0198988423h5><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [PSUBS-MAILIST] Hatch
mechanisms</DIV></DIV></DIV>
<DIV>
<DIV class=yiv0198988423h5>
<DIV><U></U>
<DIV>
<DIV>Hank,</DIV>
<DIV>Looks like a nice simple solution. Thanks for sharing that
one. I've got loads of flywheel pullers and the like that could be
adapted.</DIV>
<DIV>Regards</DIV>
<DIV>James<U></U><BR clear=none></DIV>
<DIV>On 30 October 2013 12:29, hank pronk <SPAN dir=ltr><<A
href="mailto:hanker_20032000@yahoo.ca" shape=rect rel=nofollow target=_blank
ymailto="mailto:hanker_20032000@yahoo.ca">hanker_20032000@yahoo.ca</A>></SPAN>
wrote:<U></U>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV><SPAN>James,</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>The
hatch picture is with new sub on the project page. </SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>Hank<VAR></VAR></SPAN></DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV dir=ltr>
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
face=Arial><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> "<A
href="mailto:jimtoddpsub@aol.com" shape=rect rel=nofollow target=_blank
ymailto="mailto:jimtoddpsub@aol.com">jimtoddpsub@aol.com</A>" <<A
href="mailto:jimtoddpsub@aol.com" shape=rect rel=nofollow target=_blank
ymailto="mailto:jimtoddpsub@aol.com">jimtoddpsub@aol.com</A>><BR
clear=none><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> <A
href="mailto:personal_submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</A>
<BR clear=none><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B>
Wednesday, October 30, 2013 6:13:10 AM </FONT>
<DIV><U></U><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re:
[PSUBS-MAILIST] Hatch mechanisms<U></U></DIV></DIV>
<DIV><U></U>
<DIV><FONT color=black face=arial></FONT>
<DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent" size=3
face="Arial, Helvetica, sans-serif">Checklist item: Proper tools
onboard in the event a component of the hatch mechanism binds or
breaks.</FONT></DIV>
<DIV></DIV>
<DIV></DIV></DIV>
<DIV style="FONT-SIZE: 10pt; FONT-FAMILY: arial, helvetica">-----Original
Message-----<U></U>From: James Frankland <<A
href="mailto:jamesf@guernseysubmarine.com" shape=rect rel=nofollow
target=_blank
ymailto="mailto:jamesf@guernseysubmarine.com">jamesf@guernseysubmarine.com</A>><U></U>To:
Personal Submersibles General Discussion <<A
href="mailto:personal_submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</A>><U></U>Sent:
Wed, Oct 30, 2013 6:51 am<U></U>Subject: Re: [PSUBS-MAILIST] Hatch
mechanisms<U></U><U></U>
<DIV>slightly lower seat!<U></U><U></U>
<DIV>
<DIV>On 30 October 2013 11:40, Joe Perkel <SPAN dir=ltr><<A
href="mailto:josephperkel@yahoo.com" shape=rect rel=nofollow target=_blank
ymailto="mailto:josephperkel@yahoo.com">josephperkel@yahoo.com</A>></SPAN>
wrote:<U></U> </DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<TABLE style="COLOR: #000" cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD vAlign=top>
<DIV>Speaking of this hatch issue, would all this extra hardware
present a head butting problem? How to deal with that? A more dished
profile, or a slightly taller conning tower? <U></U></DIV>
<DIV><U></U>Joe<U></U><U></U>Sent from Yahoo! Mail for
iPad</DIV></TD></TR></TBODY></TABLE>
<DIV>
<DIV><U></U>
<DIV>
<DIV style="FONT-SIZE: 0.9em">
<DIV>
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV>
<DIV><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN> </B>James Frankland
<<A href="mailto:jamesf@guernseysubmarine.com" shape=rect rel=nofollow
target=_blank
ymailto="mailto:jamesf@guernseysubmarine.com">jamesf@guernseysubmarine.com</A>>;
<U></U><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN> </B>Personal
Submersibles General Discussion <<A
href="mailto:personal_submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:personal_submersibles@psubs.org">personal_submersibles@psubs.org</A>>;
<U></U></DIV></DIV>
<DIV><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN> </B>Re:
[PSUBS-MAILIST] Hatch mechanisms <U></U><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN> </B>Wed, Oct 30, 2013 10:06:59 AM
<U></U></DIV></DIV>
<DIV>
<DIV><U></U>
<TABLE style="COLOR: #000" cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD vAlign=top>
<DIV>
<DIV>Hank,</DIV>
<DIV>How does the mechanism work? turning the wheel obviosly
lifts the ends under the hatch lip. Dont suppose you have a
dwg?</DIV>
<DIV>Regards</DIV>
<DIV>James<U></U><U></U></DIV></DIV>
<DIV>
<DIV>On 29 October 2013 18:15, hank pronk <SPAN dir=ltr><<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>hanker_20032000@yahoo.ca</A>></SPAN>
wrote:<U></U> </DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV>
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV>
<DIV><SPAN>Jim,</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>that
is exactly what I did with my k350 hatch. I didn't have tie
rods yet so I put adjusting bolts in the dogs. I intent to
change to tie rods from go carts. This is very easy to
build. The slide system is the easiest to fabricate though
<VAR></VAR>and less complicated. Gamma has
slides.</SPAN></DIV>
<DIV
style="FONT-SIZE: 16px; FONT-FAMILY: tahoma, new york, times, serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>Hank</SPAN></DIV>
<DIV><U></U></DIV></DIV>
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: tahoma, new york, times, serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV dir=ltr>
<DIV>
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: rgb(204,204,204) 1px solid; BORDER-RIGHT: rgb(204,204,204) 1px solid; BORDER-BOTTOM: rgb(204,204,204) 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: rgb(204,204,204) 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
face=Arial></FONT>
<DIV><B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B> James
Frankland <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>jamesf@guernseysubmarine.com</A>><U></U><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> Personal Submersibles
General Discussion <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>personal_submersibles@psubs.org</A>>
<U></U></DIV></DIV><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Tuesday, October 29,
2013 10:20:14 AM<U></U><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> Re: [PSUBS-MAILIST]
Hatch mechanisms<U></U></DIV>
<DIV><U></U>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>Hi Jim. I reckon i took that picture! unless you
took one almost exactly the same! Its the lanzarote sub i
think, i remember sending it to someone, Brent i think.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><U></U><U></U> </DIV></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV>On 29 October 2013 14:38, <SPAN dir=ltr><<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>jimtoddpsub@aol.com</A>></SPAN>
wrote:<U></U> </DIV></DIV></DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid"><FONT
color=black face=arial></FONT>
<DIV style="FONT-SIZE: 10pt; FONT-FAMILY: arial, helvetica">
<DIV>
<DIV>
<DIV><FONT color=black face=arial></FONT>
<DIV>
<DIV>
<DIV><SPAN><FONT size=3>On this hatch mechanism the dogs pivot
instead of sliding. The arms are threaded to adjust
the length turnbuckle style.</FONT></SPAN></DIV><SPAN></SPAN>
<DIV> </DIV>
<DIV style="FLOAT: none" align=left><IMG title=CIMG3887.JPG
style="VERTICAL-ALIGN: middle; MARGIN: 5px" alt=CIMG3887.JPG
width=275></DIV>
<DIV><SPAN><FONT size=3>For sliding dogs, beveling them where
they contact the latch point allows them to progressively
tighten as they move into place. The latch points on the
tower should either be replaceable or have replaceable wear
plates. That also allows you to change the thickness of
the wear plates in order to adjust the pressure of the hatch to
the landing.</FONT></SPAN></DIV>
<DIV><SPAN><FONT size=3>-Jim</FONT></SPAN></DIV><FONT
face="Arial, Helvetica, sans-serif"></FONT></DIV>
<DIV></DIV>
<DIV></DIV></DIV></DIV></DIV>
<DIV style="FONT-SIZE: 10pt; FONT-FAMILY: arial, helvetica">
<DIV>
<DIV>-----Original Message-----<U></U>From: James Frankland
<<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>jamesf@guernseysubmarine.com</A>><U></U>To:
Personal Submersibles General Discussion <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>personal_submersibles@psubs.org</A>><U></U>Sent:
Tue, Oct 29, 2013 6:53 am<U></U>Subject: Re: [PSUBS-MAILIST]
K-350 Mods<U></U><U></U> </DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV>anything like that would be ok by the looks of
things. That one is good because it only requires one
through hull.<U></U><U></U> </DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV>On 29 October 2013 11:25, Joe Perkel <SPAN dir=ltr><<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>josephperkel@yahoo.com</A>></SPAN>
wrote:<U></U> </DIV></DIV></DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV>
<DIV>
<TABLE style="COLOR: #000" cellSpacing=0 cellPadding=0
border=0>
<TBODY>
<TR>
<TD vAlign=top>James,<BR clear=none><BR clear=none>2400
series, look for drawings at bottom of page for that
series. The cast hatches are of no value to us but the
mechanisms I believe are.<BR clear=none><BR
clear=none><BR clear=none>Joe<BR clear=none><BR
clear=none>Sent from Yahoo! Mail for
iPad</TD></TR></TBODY></TABLE></DIV></DIV></DIV>
<DIV>
<DIV><U></U>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV style="FONT-SIZE: 0.9em">
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: rgb(204,204,204) 1px solid; BORDER-RIGHT: rgb(204,204,204) 1px solid; BORDER-BOTTOM: rgb(204,204,204) 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: rgb(204,204,204) 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><B><SPAN
style="FONT-WEIGHT: bold">From:</SPAN> </B>James Frankland
<<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>jamesf@guernseysubmarine.com</A>>;
<U></U><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN>
</B>Personal Submersibles General Discussion <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>personal_submersibles@psubs.org</A>>;
<U></U><B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN>
</B>Re: [PSUBS-MAILIST] K-350 Mods <U></U><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN> </B>Tue, Oct 29, 2013
11:15:49 AM <U></U></DIV></DIV></DIV></DIV></DIV>
<DIV>
<DIV><U></U>
<TABLE style="COLOR: #000" cellSpacing=0 cellPadding=0
border=0>
<TBODY>
<TR>
<TD vAlign=top>
<DIV>
<DIV>
<DIV>
<DIV>I cant see the one you mean Joe, is there a product
number?<U></U><U></U></DIV></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>On 29 October 2013 10:54, Joe Perkel <SPAN
dir=ltr><<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>josephperkel@yahoo.com</A>></SPAN>
wrote:<U></U> </DIV></DIV></DIV></DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV>
<DIV>
<DIV>
<DIV
style="FONT-SIZE: 14pt; FONT-FAMILY: helveticaneue, helvetica neue, helvetica, arial, lucida grande, sans-serif">
<DIV>
<DIV>
<DIV><SPAN>James,</SPAN></DIV>
<DIV><SPAN></SPAN> </DIV>
<DIV
style="FONT-SIZE: 19px; FONT-FAMILY: helveticaneue, helvetica neue, helvetica, arial, lucida grande, sans-serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>Ive
given thought to the hatch in the past, take a look at
freeman marine and look at the cam mechanism with
dogs, <A
href="http://www.freemanmarine.com/ProductsHatches.htm"
shape=rect rel=nofollow
target=_blank>http://www.freemanmarine.com/ProductsHatches.htm</A></SPAN></DIV>
<DIV><SPAN></SPAN> </DIV>
<DIV
style="FONT-SIZE: 19px; FONT-FAMILY: helveticaneue, helvetica neue, helvetica, arial, lucida grande, sans-serif; FONT-STYLE: normal; BACKGROUND-COLOR: transparent"><SPAN>Could
not a rotating shaft pass through the center to both
sides via same <SPAN>thru-</SPAN>hull as side
thrusters, with a wheel on both sides and a similar
cam <SPAN><SPAN>mechanism</SPAN></SPAN> on the inside?
Upward Port moved a bit forward then, and beef up the
hinge for extra weight as you said.</SPAN></DIV>
<DIV><SPAN></SPAN> </DIV>
<DIV><SPAN></SPAN> </DIV>
<DIV><SPAN>Joe</SPAN></DIV>
<DIV><U></U></DIV></DIV></DIV>
<DIV
style="FONT-SIZE: 14pt; FONT-FAMILY: helveticaneue, helvetica neue, helvetica, arial, lucida grande, sans-serif">
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: helveticaneue, helvetica neue, helvetica, arial, lucida grande, sans-serif">
<DIV>
<DIV>
<DIV dir=ltr>
<DIV
style="FONT-SIZE: 0px; BORDER-TOP: rgb(204,204,204) 1px solid; BORDER-RIGHT: rgb(204,204,204) 1px solid; BORDER-BOTTOM: rgb(204,204,204) 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; MIN-HEIGHT: 0px; BORDER-LEFT: rgb(204,204,204) 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"></DIV><FONT
face=Arial><B><SPAN
style="FONT-WEIGHT: bold">From:</SPAN></B> James
Frankland <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>jamesf@guernseysubmarine.com</A>><BR
clear=none><B><SPAN
style="FONT-WEIGHT: bold">To:</SPAN></B> <A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>personal_submersibles@psubs.org</A>;
PSUBS Member Discussion Group <<A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect rel=nofollow>member-forum@psubs.org</A>>
<BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Tuesday,
October 29, 2013 5:55 AM<BR clear=none><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B>
[PSUBS-MAILIST] K-350 Mods<BR
clear=none></FONT></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV><U></U>
<DIV>
<DIV>Jon\Joe sent a message yesterday i think
regarding suggested K-350 modifications.</DIV>
<DIV> </DIV>
<DIV>I would suggest these as critical.</DIV>
<DIV> </DIV>
<DIV>1. Hatch. Opening from both
sides. Worst part of the design I think.</DIV>
<DIV> </DIV>
<DIV>2. Hatch bracket. Could do with
beefing up, it feels a bit flimsy. Probably
could do with some traingular flanges welding
on.</DIV>
<DIV> </DIV>
<DIV>3. Variable tank mounting. The way
the tank mounts is awkward and doesnt allow any
adjustment. Much easier and better would be flat
horizontal brackets welded to the battery pods that
join to corresponding flat brackets on the vbt.
Slotted holes on one of the planes would allow the
tank to slide forward and back a little to allow that
awkward vent to be fitted easily. Also the tank
could be just lifted up and on. Very simple
change.</DIV>
<DIV> </DIV>
<DIV>I think other than that, other modifications are
depending on how much trouble you want to go to and
cosmetics.</DIV>
<DIV> </DIV>
<DIV>For example,</DIV>
<DIV> </DIV>
<DIV>I changed the battery pod endcap seals. I
had a real pain trying to make them as per the
plans. The way i did them in the end with
flanges was a lot easier. But probably nothing
wrong with the original design.</DIV>
<DIV> </DIV>
<DIV>Skids. I didnt like the ones shown, they
would just get all the paint knocked off. Again,
probably nothing wrong with the original design.</DIV>
<DIV> </DIV>
<DIV>I made all the flanges and protrutions from
stainless.</DIV>
<DIV> </DIV>
<DIV>Electrical penetrators added to the battery pods
to eliminate the ones shown on the plans.</DIV>
<DIV> </DIV>
<DIV>The 2 extra downward facing viewports i put in
are really good. You could do away with the ones
at the back and put them there instead if you didnt
want to make too many.</DIV>
<DIV> </DIV>
<DIV>The dome of course.</DIV>
<DIV> </DIV>
<DIV>Overpressure valve.</DIV>
<DIV> </DIV>
<DIV>loads of little modifications.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>I'm at work, and i better get on with some of it,
instead of daydreaming about subs!</DIV>
<DIV>Kind Regards</DIV>
<DIV>James</DIV></DIV><U></U></DIV></DIV></DIV></DIV>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U><U></U></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV>
<DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U></DIV></BLOCKQUOTE></DIV><BR
clear=none></TD></TR></TBODY></TABLE></DIV></DIV></DIV></DIV></DIV>
<DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U></DIV></BLOCKQUOTE></DIV><U></U></DIV>
<DIV>
<DIV>
<DIV
style="FONT-SIZE: 12px; FONT-FAMILY: tahoma, verdana, arial, sans-serif; MARGIN: 0px"><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
Personal_Submersibles mailing list
<A href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/" shape=rect rel=nofollow>Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" shape=rect rel=nofollow target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>
</TT></PRE></DIV></DIV></DIV></DIV></DIV></DIV>
<DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U></DIV></BLOCKQUOTE></DIV><U></U></DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U><U></U></DIV></DIV></DIV></DIV></DIV></DIV>
<DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A
href="wlmailhtml:{DE63928F-59EB-4E82-9B80-4C7C13C26BE9}mid://00000025/"
shape=rect
rel=nofollow>Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U></DIV></BLOCKQUOTE></DIV><BR
clear=none></TD></TR></TBODY></TABLE></DIV></DIV></DIV></DIV></DIV>
<DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A href="mailto:Personal_Submersibles@psubs.org"
shape=rect rel=nofollow target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U></DIV></BLOCKQUOTE></DIV><U></U></DIV>
<DIV>
<DIV
style="FONT-SIZE: 12px; FONT-FAMILY: tahoma, verdana, arial, sans-serif; MARGIN: 0px"><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
Personal_Submersibles mailing list
<A href="mailto:Personal_Submersibles@psubs.org" shape=rect rel=nofollow target=_blank ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A>
<A href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles" shape=rect rel=nofollow target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A>
</TT></PRE></DIV></DIV></DIV></DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A href="mailto:Personal_Submersibles@psubs.org"
shape=rect rel=nofollow target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U><U></U></DIV></DIV></DIV></DIV></DIV><BR
clear=none>_______________________________________________<BR
clear=none>Personal_Submersibles mailing list<BR clear=none><A
href="mailto:Personal_Submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><BR
clear=none><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><BR
clear=none><BR
clear=none></BLOCKQUOTE></DIV><U></U></DIV><U></U>_______________________________________________<U></U>Personal_Submersibles
mailing list<U></U><A href="mailto:Personal_Submersibles@psubs.org" shape=rect
rel=nofollow target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><U></U><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><U></U><U></U><U></U></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV><BR
clear=none>_______________________________________________<BR
clear=none>Personal_Submersibles mailing list<BR clear=none><A
href="mailto:Personal_Submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><BR
clear=none><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><BR
clear=none><BR clear=none></BLOCKQUOTE></DIV></DIV></DIV></DIV>
<DIV id=yiv0198988423yqt45370
class=yiv0198988423yqt3742165237>_______________________________________________
Personal_Submersibles mailing list<A
href="mailto:Personal_Submersibles@psubs.org" shape=rect rel=nofollow
target=_blank
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect rel=nofollow
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV>
<DIV class=hr
style="FONT-SIZE: 0px; BORDER-TOP: #ccc 1px solid; HEIGHT: 0px; BORDER-RIGHT: #ccc 1px solid; BORDER-BOTTOM: #ccc 1px solid; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LEFT: 0px; MARGIN: 5px 0px; BORDER-LEFT: #ccc 1px solid; LINE-HEIGHT: 0; PADDING-RIGHT: 0px"
readonly="true"></DIV>_______________________________________________<WBR>Personal_Submersibles
mailing
list<WBR>Personal_Submersibles@psubs.org<WBR>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles<WBR></DIV></DIV></DIV></DIV></DIV></DIV><WBR>
<DIV id=yqt86798
class=yqt4536574842>_______________________________________________<WBR>Personal_Submersibles
mailing list<WBR><A href="mailto:Personal_Submersibles@psubs.org" shape=rect
ymailto="mailto:Personal_Submersibles@psubs.org">Personal_Submersibles@psubs.org</A><WBR><A
href="http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles"
shape=rect
target=_blank>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles</A><WBR></DIV><WBR><WBR></DIV></DIV></DIV></DIV>
<P>
<HR>
_______________________________________________<BR>Personal_Submersibles mailing
list<BR>Personal_Submersibles@psubs.org<BR>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles<BR></DIV></DIV></DIV></BODY></HTML>