[PSUBS-MAILIST] connectors

Wed May 1 17:41:37 EDT 2024

 I have worked with Jacobo Aguilar for years when purchasing all kinds of Subconn connectors and never had an issue with not selling product because of being for a manned submersible.  His contact info is below:

| 
| Jacobo Aguilar |

 |
| Item Sales Manager |
| 
| MacArtney Inc. ‑ Gulf of Mexico Operations
 |

 |
| 
| 
| Office:  | +1 713 266 7575
 |
| Mobile:  | +1 713 504 1757
 |
| Email:  | jag at macartney.com |
| Website:  | www.macartney.com
 |

 |

 |

Best
Cliff

    On Wednesday, May 1, 2024 at 04:34:51 PM CDT, Justin Helland via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  

 Just wanted to give you guys a heads up, I recently tried to place an order for Subconns and mentioned that I was with Psubs, and they refused to sell them to me for a manned submersible. There might be some kind of regulation/safety issue that they're trying to cover themselves from. I would definitely skip mentioning that you're buying them for a manned sub, maybe tell them it's for an ROV or something.

On Wed, May 1, 2024 at 2:13 PM Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

I will add to this that in addition to the SubConn / Impulse type wet or underwater pluggable connectors, in industrial / commercial applications I have also frequently made use of Conax connectors - particularly for high pressures.

https://www.conaxtechnologies.com/

Sean

-------- Original Message --------
On May 1, 2024, 14:13, Jon Wallace via Personal_Submersibles < personal_submersibles at psubs.org> wrote:

 Rick, there are a few options.  If you want a commercial grade connector Subconn is an option.  Tell them you are with PSUBS and they'll give you a 30% discount.  Suburban marine is a DIY option that is likely cheaper than even the Subconn discount.  Lastly, depending upon the amps you need you could use Tyco connectors from Digikey and make your own.  I am using Tyco connectors for both my low voltage instruments and my higher power components.
Jon

    On Wednesday, May 1, 2024 at 03:44:33 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  

 Was wondering where the best place would be to purchase two prong underwater connectors?I was getting ready to pot my wire connections for my 6 outside lights and then realized that it would be much better to be able to easily disconnect them when they go bad and not have to re pot them .
Rick_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20240501/bab3feb5/attachment.html>