[PSUBS-MAILIST] Pressure proof motor

[Alan James via Personal_Submersibles]

Ian,Cliff seemed interested in this option & I'm getting some more measurements for him that he requested.We both looked at another option but it had electronics inside the housing. Cliff could keep you in the loop. He and Alex were looking at a minn kotta modification but sounds like he's open to pursuing a brushless motor. Another good point to them is that the windings are on the outside up against the can, so they can be cooled effectively.If you (or someone) can think of a better way I can get videos to you let me know.Alan 


Sent from Yahoo Mail on Android 
 
  On Sun, 10 Dec 2023 at 5:02 pm, irox via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20231210/fa64bfa9/attachment.html>