[PSUBS-MAILIST] single seat sub

[via Personal_Submersibles]

Hi Roberto, I have one such a dome on stock. See https://www.airesearch.nl/products/

 

I solved the low freeboard problem on my sub with an outer sail.

 

Br.

 

Van: Personal_Submersibles <personal_submersibles-bounces at psubs.org> Namens Alan James via Personal_Submersibles
Verzonden: woensdag 4 november 2020 00:43
Aan: roberto alvarez via Personal_Submersibles <personal_submersibles at psubs.org>
Onderwerp: Re: [PSUBS-MAILIST] single seat sub

 

Hi Roberto, 

what part of the World do you live in? 

If its Europe there is Emile. 

Alan

 

On Wednesday, November 4, 2020, 10:36:38 AM GMT+13, roberto alvarez via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote: 

 

 

were i can find a dome?will follow the K250 ,may be just shorter and cameras instead the front viewport, best recomendation for the hemisphere?

 

El mar., 3 de nov. de 2020 11:01 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > escribió:

If you are building a Deep Worker then a dome  will restrict your freeboard greatly. A cylinder is a better option for freeboard
Hank

Sent from my iPhone

> On Nov 3, 2020, at 11:04 AM, roberto alvarez via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote:
> 
> 
> Hi,i am members since 2003 aprox,read articles,and conversations, i bought the K250 plans few years ago
> but never build, in 2010 a tour vessel sank in my area, nw us full of fishing nets, was a 115 ft boat, and now i feel the need of build a submersible vehicle, i try by the scuba side option, but to reach this depth i need a technical diving course, gear and the limit will be the 50 meters for tec 1, and deco with oxigem,  if i calculate the investment will be around 3000 dlls in training for a 40 minutes immersion and 40 minutes of deco( plus gas cost)
> 
> My approach will be a version of the deep worker, single person small vehicle, i quote the acrylic hemisphere in San Diego California, will be the only piece that i will not be able to build locally
> 
> for a 24 inch, 1 inch tick  is recommended, i will use the hull calc to verify the sections , the depth limit in the area is 80 meters, if some one has any recommendation , please reply, thanks
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20201104/dfcba435/attachment.html>