[PSUBS-MAILIST] Bladder MBT's

[Alan via Personal_Submersibles]

Hank,
I was looking at this a while back & one of my thoughts was that the
deflated bag might be crushed in to the inflation port & do itself damage.
What are they made of? If you bought the right glue you could glue all
sorts of attachments on. 
Alan

> On 8/05/2020, at 11:51 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All, I have ordered a 50 gallon water bladder to experiment with for MBT's on my little sub project.  The bladders are pretty tough because they are rated for 65 psi.  I have to figure out how to secure them to the sub.  I am thinking a fold away panel, or spring loaded straps.  They have a 1.25 inch fitting on the top and on the end when laying flat.  I need some ideas?  I will have two side bags and one behind the sphere.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200509/589ca4ea/attachment.html>