[PSUBS-MAILIST] Cutting styrofoam

[Rick Patton via Personal_Submersibles]

Just addressed something that I have not been looking forward to and it worked great! 
I had some thin SS wire laying around so I figured out the length I needed it to be then attached one end to the ground clamp of my welding machine and the other end to my electrode holder, set the machine on its lowest setting ( 10 to 55 amps DC ) then started turning up the rheostat with the wire pulled tight and at 40% the wire started going through the styrofoam like butter! So anyone that has a welder and will be cutting styrofoam in the future, this works great.
Rick 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1902.jpg
Type: image/jpeg
Size: 100267 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190518/bd192ff8/attachment-0001.jpg>
-------------- next part --------------


Sent from my iPhone