[PSUBS-MAILIST] Riv Nut tool - my new best friend

[Alan via Personal_Submersibles]

Brian,
I hadn't seen that before, but had to watch a video to see how it worked.
Earlier this year I brought up the subject of embedding inserts in fibreglass 
for attaching things to my ballast tank & exostructure etc. One good tip I
got from someone was to square off the embedded section of the rivet so
It can never turn under tightening force.
Alan

> On 11/05/2019, at 11:10 PM, Brian Hughes via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Where has this been all my life? In the few places I've used screw in bolts to hold things in Harold, drilling and tapping the ribs was a major pain and tool breaker. This thing, drill a hole you're done. Why didn't the tool mentors tell me about this thing years ago?!?!?
> 
> Brian
> 
> https://www.amazon.com/Smittybilt-2834-Black-Nutsert-Tool/dp/B01HDYW44K/ref=asc_df_B01HDYW44K/?tag=hyprod-20&linkCode=df0&hvadid=241896598945&hvpos=1o5&hvnetw=g&hvrand=14495645257294348732&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9008062&hvtargid=pla-524049154200&psc=1
> 
> 
> 
> Get Outlook for Android
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190512/7c0d181f/attachment-0001.html>