[PSUBS-MAILIST] Silicone

[David Colombo via Personal_Submersibles]

Hi Jon,
I have a call into the West Coast rep to ask the question, Is the Macropoxy
required to have the SeaGuard 6000 Marine epoxy as a primer? According to
their most recent bulletin from Feb 23, 2016, The SeaGuard 6000  it appears
that the the Macropoxy 646 goes over the SeaQuard 6000, and is recommended
for steel, atmospheric service.  I'll let you know what I find out.

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



On Wed, Mar 27, 2019 at 5:43 PM Jon Wallace via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

>
> Macropoxy 646 Fast Cure Epoxy is what the Rep recommended.
>
>
> ------------------------------
> *From:* Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Wednesday, March 27, 2019 7:37 PM
> *Subject:* Re: [PSUBS-MAILIST] Silicone
>
> Alec
>
> Would I just ask for macropoxy and what color or are there different types?
> Rick
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190327/b0164861/attachment.html>