[PSUBS-MAILIST] Silicone

[Gregory Snyder via Personal_Submersibles]

You should use paint that didn’t do very well in school because it needs to be graded below C - level.

… And that completes my knowledge of underwater paint.
Good luck!
> On Mar 26, 2019, at 7:11 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> didn't get any feedback from you guys regarding the best paint to use on my sub so maybe my request didn't go out. Gonna try again.
> Rick
> 
>> On Tue, Mar 26, 2019 at 1:59 PM hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Brian,
>> Are you sure the black is from the o-ring.  My oil turns black from I assumed carbon off the brushes.  
>> Hank
>> 
>> On Tuesday, March 26, 2019, 2:53:05 PM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> 
>> Hi All,
>>                 I decided to try wd-40's new " silicon" spray , it started melting my O rings. Basically I noticed black coming off the O ring into the lubricant.    I have since gone back to another silicone spray which is an automobile product.  Does anyone have a preferred silicone product ?  I think my O rings are Buna 
>> 
>> 
>> Brian
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190326/06f8bd00/attachment.html>