[PSUBS-MAILIST] SeaQuestor Progress - Exoskeleton

[Alec Smyth via Personal_Submersibles]

I really enjoy following your progress -- I get all the excitement without
any of the work involved! Great job!!!

Best,
Alec

On Mon, Jul 1, 2019 at 8:54 PM David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Guys, worked on foam forms on the exoskeleton this weekend. Started to
> move them from the jig to dry fitting on the pressure hull. I knew that I
> was going to have to raise the landing platform on the trailer by 6" so
> that the wings would clear the fender wells. Looks like I will have to
> remove the fenders temporarily until i get my hoist up and assembled to
> lift the hull off the trailer.  Starting look like the real thing now.
> Also mocked up the rear thrusters on the jig to work out the linkage
> configuration.
>
>
> Best Regards
> David
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190702/fd5df692/attachment.html>