[PSUBS-MAILIST] SeaQuestor progress.

[Rick Patton via Personal_Submersibles]

David

Have you come up with a method yet for creating your hot wire rig? I have a
chunk of Styrofoam that I want to shape for my MBT molds and the first
layer has to be the OD of my hull as close as I can get and my concern was
that if I use a hot wire/knife, the Styrofoam would shrink away from both
sides of the source.
Rick

On Sat, Jan 5, 2019 at 2:32 PM David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi guys, I aquired 380cf (4) 4ft x 3ft x 8ft blocks of foam for the
> exoskeleton shaping process. First I need to build the platform for the
> (16) station ribs to be attached at 12" o.c. The station ribs have been cnc
> cut from 3/4" plywood and are hanging on the wall ready to be assembled.
> Then build a hot wire cutting rig to slice the foam into 11.25" wide
> blocks. Then the shaping process can begin.
> David
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190105/6b4127ac/attachment.html>