[PSUBS-MAILIST] SeaQuestor progress

[David Colombo via Personal_Submersibles]

Hi Alan,
The lights are my design that I had machined to test for a 10k lumen light.
The rear thrusters will rotate 45 degrees each left and right. The aluminum
shaft is seated in a UHMW collar in two locations and has a locking
bellhorn that will tie the two thrusters together. The black extension is
designed  to add up tow three additional sensors and air compensation, so I
don't have to tap the thruster. I will be using a Linear actuator to drive
the rotation of the pair of thrusters.

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



On Thu, Feb 14, 2019 at 10:24 AM Alan via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Looks good David.
> On the motor mount you have a bracket mounted on top of a white cylinder,
> is this for rotation? Also, are the lights from Nuytco, they look similar!
> Alan
>
>
>
> > On 14/02/2019, at 8:03 PM, David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
> >
> > Hi guys, working on the exoskeleton for the SeaQuestor, dry fitting the
> rear thrusters with the new machined mount tubes, horizontal wing
> thrusters,  and forward wing lights. The rear thruster assembly includes a
> segment with external ports for air compensatation and future sensors. My
> thru hull penatration plates are at the shop having final machining and
> shoud be ready in a week. With a total of 30 port locatations I have plenty
> for future connections. I also get to make a few design esthetic changes as
> the cnc ribs were cut from my 3d model 1 year ago and it did not reflect
> recent revisions. But thats half the fun of design. Build a mock up and
> then make refinements. I hope to have the full set of rib stations adjusted
> and locked into position on the keel stand this weekend so i can start the
> foam cutting.
> > Best Regards,
> > David
> > <Image935852460642039751.jpg>
> > <Image6325880967552445361.jpg>
> > <Image2524775597811180538.jpg>
> > <Image1956599815228377227.jpg>
> > <Image1155490186861617641.jpg>
> > <Image8474093393079436704.jpg>
> > <Image859092703315405636.jpg>
> > <Image5046581881221001057.jpg>
> > <Image8618917649768473062.jpg>
> > <Image6490811729493042951.jpg>
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190214/c9ba5e9b/attachment.html>