[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Very good Hank,
I also have that in mind for my manipulator.
Alan

> On 10/02/2019, at 7:58 AM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hank, how much tension was that polypropylene under in the video? You went through it like butter.
> 
> Is this integrated into a clamping jaw? How do you make sure that you don't cut something that you're only trying to grab?
> 
> What do you figure the capacity is? Would it go through 5/8 polyester double braid?
> 
> Sean
> 
> 
> -------- Original Message --------
> On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:
> 
> 
> Sent from ProtonMail mobile
> 
> 
> 
> -------- Original Message --------
> On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:
> 
> 
> Sent from ProtonMail mobile
> 
> 
> 
> -------- Original Message --------
> On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> Just finished the rope cutter on my electric manipulator.  Here is the video
> hank
> 
> ----- Forwarded Message -----
> From: xxx xxxxx <mp13 at live.ca>
> To: hanker_20032000 at yahoo.ca <hanker_20032000 at yahoo.ca>
> Sent: Friday, February 8, 2019, 2:27:46 PM MST
> Subject:
> 
> https://www.youtube.com/watch?v=InLh7m2wuVo 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190210/4a744cb9/attachment-0001.html>