[PSUBS-MAILIST] sub test

Mon Aug 19 17:22:02 EDT 2019

I think you guys are over thinking this O2 reading beyond 25 percent.   If you are diving and you reach an alarm of 25 percent, you go to the surface. There is no reason to go beyond 25 percent reading because you will abort your dive. Calibrating is an other issue if your sub is not well vented prior to diving. I take the O2 sensor outside the sub to calibrate.   A large blower is my solution also. 
Hank

Sent from my iPhone

> On Aug 18, 2019, at 2:04 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,          The shape of the hull and overall length is for good sea keeping ability because I plan on traveling some distance on the surface.  Unlike the common Kittridge designs which do not handle surface transversing very well.  Also the other drawback with the Kittridge designs is their lack of freeboard, which is ok if you're in a lake but in the ocean, not so good, especially if you have to open the hatch.  
> 
> Brian
> 
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] sub test
> Date: Mon, 19 Aug 2019 07:36:14 +1200
> 
> Hi Brian,
> congratulations on getting under the water.
> I thought you might have been up on the conning tower rocking her around
> to check the stability.
> DNV-GL have rules on stability & procedures for testing. They might be a good
> Guide line to see if the stability is acceptable.
> Maybe you could get rid of 10ft of the front of your sub. I can't see it's purpose.
> You could always put a small deck on the sphere starting at the base of the conning
> tower, & have either syntactic foam, floats or a ballast tank under it. Then add lead as needed to the inside of your hull.
> That huge conning tower is going to destabilise you on the surface until you descend 
> to the point that it's weight is negated by it's positive buoyancy. 
> Alan
> 
> On 19/08/2019, at 6:12 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
>                   Well I removed a massive section of concrete from the front top area of my sub to lighten the overall weight and especially the weight up front.   I wasn't really sure how this would effect things so I didn't try to anticipate anything, so I just put her back in the water to see what would happen.  I did move some weight forward because I though maybe that would be necessary.   So it looks like I have an imbalance and I appear to be a little top heavy when in the surfaced state, and the nose will need some added buoyancy.  It looks like I'm going to have to add some flotation pontoons to the sides back towards the sphere so I don't tip over.  Also I have some material that I can remove up top that is not necessary  , I built on a support structure under my deck that is way over built , so I can shed a little weight there.  
> 
> Anyway here is a video of my latest dunk test:
> 
> 
> 
> https://www.youtube.com/watch?v=-S3CZU66mGs
> 
> 
> Brian
> 
> 
> 
> 
> 
> 
>   
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190819/3f635d54/attachment-0001.html>