[PSUBS-MAILIST] pneumatic HP manifold

[hank pronk via Personal_Submersibles]

 Jon,My 80"s are outside the hull and I use a 6000 psi regulator inside the hull.Hank
    On Sunday, April 7, 2019, 6:09:04 PM MDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Thanks Brian.  Good source, found a manifold in no time.

      From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, April 7, 2019 7:00 PM
 Subject: Re: [PSUBS-MAILIST] pneumatic HP manifold
  
McMaster Carr 

--- personal_submersibles at psubs.org wrote:

From: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] pneumatic HP manifold
Date: Sun, 7 Apr 2019 21:57:34 +0000 (UTC)


Where are people sourcing their manifolds for HP ballast air?  I'm having a difficult finding anything in the 3500 to 5000 range._______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190408/7dd4e0fc/attachment-0001.html>