[PSUBS-MAILIST] K350 motors and housings - available

[Brian Hughes via Personal_Submersibles]

As per AC, I also have a pile of them and been playing. The latest was an attempt to vacuum mold a Kydex cover for an experiment. No joy. I couldn't get the Kydex to vacuum around my mold before it cooled to much to still be flexible. I tried hitting it with a heat gun while it was under vacuum, but that just melted it.  Not yet discouraged!

OTOH, I picked up a Yong Heng compressor for filling tanks whilst on the road. Haven't tried it yet, just got my activated charcoal and micro sieve material for the filter, but I want to use a peltier water cooling module to chill the water going into the compressor's cooling jacket. The 6 chip one, with the water heat exchangers on the sides and cooling fins in the middle, has a design problem. The supplied fan can't pull enough air to really pull off the heat. Ordered a few sizes of radial fans to see if they work better.

Back to Harold, for now sticking with a small insulated ice chest with a fan drawing air across frozen water bottles for my AC. Also dehumidifies.

Brian



Get Outlook for Android<https://aka.ms/ghei36>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190402/5d17e97a/attachment.html>