[PSUBS-MAILIST] Drill Sharpening

[Jon Wallace via Personal_Submersibles]

Great idea Alec.  I think I will implement that.

      From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Monday, September 3, 2018 8:18 AM
 Subject: Re: [PSUBS-MAILIST] Drill Sharpening
   
Hi Jon,
Now that trailer looks capable of carrying a serious load! I have one small suggestion. Take a flat bar of aluminum, or a couple of them, say 2x1/4, and bolt lengthwise along the bottom of all those I beams. I take it they are all secured only at their tops. It's to prevent them tripping if the bottom of the trailer comes into contact with something - like a submerged rock on a launch ramp.
Best,
Alec
On Sun, Sep 2, 2018 at 11:02 PM Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hank, I did (see photo attached), although I have one more gusset connection to fabricate tomorrow.  Thirty feet of 6061 Aluminum 4x6 I-beam cut into six-foot length cross members.  Cross members are 15.5 inches on center and the K-600 sits across the three center cross members.  All that silver flaky stuff on the asphalt...that's not a worn out driveway, that's about a billion pounds of drill shavings.
I hope to get the sub back on the trailer tomorrow and then will probably dismantle the gantry sometime this month, in preparation for winter.  That has been an extremely handy tool.
Jon

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> 
 Sent: Sunday, September 2, 2018 9:10 PM
 Subject: Re: [PSUBS-MAILIST] Drill Sharpening
  
Jon,Did you get your new cross members in?  Hank   On Sunday, September 2, 2018, 5:04:25 PM MDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180903/e199d50a/attachment-0001.html>