[PSUBS-MAILIST] SeaQuestor pressure hull.

[David Colombo via Personal_Submersibles]

Hi Brian, 3/4" A516gr70. Next week the external rings will be placed at 12"
o.c.
David

On Sat, Sep 1, 2018, 6:11 PM Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David,     What is the thickness of those conning towers?
> Exciting fabrication !
>
> Brian
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] SeaQuestor pressure hull.
> Date: Sat, 1 Sep 2018 07:50:17 -0700
>
> Hi guys, today was fit up day for the forward sail on the SeaQuestor.
> Scribe the cutout, grind and clean the edges, fit the sail, rinse and
> repeat. Almost got the final opening correct by the end of the day. Mean
> while in the adjacent shop the frame rails were being plasma cnc cut. Next
> week will see a lot of changes.
> David
> --000000000000f56ec90574d06d85--_______________________________________________
> Personal_Submersibles mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180901/594fa018/attachment.html>