[PSUBS-MAILIST] SeaQuestor update

[Cliff Redus via Personal_Submersibles]

Looking good Dave!  Before you wire the harness, make sure you do a dry
fit of the panel in the hull.  Looks like it is going to be a tight fit to
get this into place.  Is the panel directly in front of the pilot or to the
port or starboard side?

BTW, I got the OTS head set.  Thanks.

On Thu, Nov 29, 2018 at 12:14 AM David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Met with the fabricator today after I realized my tank rack frame that was
> cut on the laser was the wrong version of my drawings so my air tanks would
> not fit. Updated drawings issued and new parts might be recut tomorrow.
> Projected delivery date of the pressure hull is the 10th. So I need to make
> my trailer mods for pick up of the hull in the next week. Meanwhile,  parts
> have been arriving due to black friday specials,  scuba tanks, tank valves,
> air hoses, thrusters, pwm, radios, custom made first aid and emergency kit,
> and tonight I'm back onto the main pilot's console assembly. Lots of
> components assemble.
> David
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181129/aff051e6/attachment.html>