[PSUBS-MAILIST] regulator

[hank pronk via Personal_Submersibles]

 Cliff, thank you, I will proceed and see how it goes.  The SS version can come down the road if needed.Hank
    On Friday, March 30, 2018, 3:36:12 PM MDT, Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 As per Alan's note this is the pressure reducing/relieving version.  Only difference with mine is I prefer the SS version. I have a single pressure reducing/relieving regulator fed off a scuba regulator LP port pressure compensating 4 minn Kota 101 lower units.  I have  mine oriented sideways and have not installed the tube Alan discussed as it seems to be working fine the way I have it.  I want to get more dive time / experience on the pressure compensation systems before I make any changes.
Cliff
On Fri, Mar 30, 2018 at 12:43 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Cliff,I just installed my R364-02B regulator on my arm and the instructions talk about a non relieving model.  I assume this one is relieving because when I reduce the pressure to the arm the excess pressure bleeds off when turning the adjustment knob. Is that correct?   Also to anyone with an opinion, the air system regulator for compensation to the arm is literally 1 foot from my side positioning thruster.  This makes me think I should air compensate that thruster instead of oil.   The system works with a small 3L air holding tank that is maintained at 300 psi from the main HP tank.  I am not sure if I should risk feeding the thruster from the small tank, in case the thruster seal  leaks it could cause the arm to flood.  Hank

______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180330/ab54ccde/attachment.html>