[PSUBS-MAILIST] Seaquestor Fabrication

[David Colombo via Personal_Submersibles]

Hi River, the shop is completely aware of the project scope and use. I will
ask then about the stamp. We should be start welding in July.
Best Regards,
David Colombo

On Sat, Jun 16, 2018, 4:39 PM River Dolfi via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Are you getting the hull U-stamped at the ASME shop? I'm interested in how
> that went. I've inquired about the general cost to have a hull welded at an
> ASME boiler shop, and they wouldn't touch me with a 29 1/2 foot pole!
>
> River J Dolfi
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/2cc9441f/attachment.html>