[PSUBS-MAILIST] SeaQuestor Fabrication

[Alan via Personal_Submersibles]

Congratulations David,
must be a great feeling seeing it materialise.
Alan

Sent from my iPad

> On 16/06/2018, at 2:33 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Guys, 
> Well after many years of planning and talking and sketching and engineering The SeaQuestor is finally under construction. While my Youtube channel is under construction as well I'm not supposed to let the cat out of the bag so to speak, but I figured that did not include my Psub Community. All pressure hull parts were cut on the plasma cadcam table last week and the first hull section was bump and rolled. Friday we will be shaping the cone section of the hull and the sails. The ASME welding shop is prepping for the parts arrival in the next couple of weeks for fit and finish and lots of welding. Stay tuned for videos of the complete build process once we launch the SeaQuestor Youtube channel.
> 
> 
> Best Regards,
> David Colombo
> 
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
> 
> <20180615_141625 small.jpg>
> <DSCN1982 smaller.jpg>
> <DSCN2008(3) smaller.jpg>
> <DSCN2042 smaller.jpg>
> <20180615_135334 small.jpg>
> <20180615_144226 small.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/39bc96d2/attachment.html>