[PSUBS-MAILIST] Small ballast tanks anyone?

[Alec Smyth via Personal_Submersibles]

Hi David,

Certainly, but could you send me your email pls? Mine is alecsmyth at gmail.com.
The email list hides our addresses.


Thanks,
Alec

On Mon, Jan 29, 2018 at 4:13 PM, David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Alex, do you have any photos. I might be able to use them.
>
> On Jan 29, 2018 12:58 PM, "Alec Smyth via Personal_Submersibles" <
> personal_submersibles at psubs.org> wrote:
>
>> Hi everyone,
>>
>> Due to a design change in Shackleton, I've got a dozen aluminum tanks to
>> get rid of. They're good quality, originally off a military vehicle.
>> There's 1/2" NPT nozzles at both ends on the heads as well as at the ends
>> of the cylinder. I have the end cap nipples plugged and the ones on the
>> cylinder are for the air to escape. Also I welded an aluminum pipe into the
>> cylinder to allow venting and flooding, and which acts as a downspout to
>> prevent burping. These tanks are 9.5" in diameter, 28" long, and provide 68
>> lbs of buoyancy each.  I can see them being used as auxiliary saddle tanks
>> on a K250, or a raft MBT built up from several small tanks. Twenty bucks
>> and shipping perhaps?
>>
>> Best,
>> Alec
>>
>>
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180129/23147077/attachment.html>