[PSUBS-MAILIST] Ammeter / PLC Question

[Alan via Personal_Submersibles]

Jon,
I have noticed in the local electronics store that where there was just
an Arduino board, now there is a section with all the peripheral sensors etc.
I bought an Arduino board with an SD card reader & temperature sensor
for monitoring my motor temperature when testing but are now looking
at doing that with the plc.
Cheers Alan

Sent from my iPad

> On 24/01/2018, at 8:06 AM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> My control system is pretty much complete in terms of functionality except that a new generation of sensors have come out since I started my project and so I'm going to update some things with better sensors.  I use a combination of raspberry and arduino which communicate via USB
> 
> Jon
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180124/af7b0e04/attachment.html>