[PSUBS-MAILIST] SeaQuestor update

[hank pronk via Personal_Submersibles]

I meant to say that I can get a  X Ray guy out to my shop for 600 dollars 

Sent from my iPhone

> On Dec 21, 2018, at 10:20 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> David. I am looking forward to hearing what you experience with the X Ray work. All I can say is that here in B.C.  I can get out to my shop to do my occupant sphere for 600 dollars. 
> Hank
> 
> Sent from my iPhone
> 
>> On Dec 21, 2018, at 8:53 AM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> Hi Guys, I'm off today to a number of welding shops for quotes now that the pressure hull has been fit up and tacked together. My wife is requiring any shop that is doing that welding also do weld xray analysis. Just curious who else has done this on their vessel and what was your experience and what advice would you give me. 
>> Attached are images of the rear hp air tank  and thruster rack,  and the forward camera rack. 
>> 
>> David
>> 
>> <291d0e49.jpg>
>> <291d0e47.jpg>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles