[PSUBS-MAILIST] Heads Question

[roberto alvarez via Personal_Submersibles]

Thank`s i search on several web sites and this one have a dealer in
california, ( i am on the west coast )  this is the page
 http://www.cmforming.com/tankheads-and-accessories.htm




2017-09-15 23:28 GMT+02:00 Alec Smyth via Personal_Submersibles <
personal_submersibles at psubs.org>:

> Ugh, mental typo. I meant "un-beveled" and "bevel them yourself", not
> "un-flanged" and "flange them yourself".
>
> !!!!!!!
>
> On Fri, Sep 15, 2017 at 5:25 PM, Alec Smyth <alecsmyth at gmail.com> wrote:
>
>> Hi Roberto,
>>
>> I believe the short description for what you need is flanged, beveled,
>> and code. You could get them unflanged, but it takes quite a while to make
>> a flange with an angle grinder. The flanges if I recall are 2". Do set up a
>> project page or something so we can follow progress!
>>
>>
>> Best,
>>
>> Alec
>>
>> On Fri, Sep 15, 2017 at 5:07 PM, roberto alvarez via
>> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>>> Hi, lost the plans cd for the k250, i am  interested in the  head
>>> selection, i found a seler in california and have
>>> flanged ,beveled ,code, non code,
>>>
>>> Will apreciate your support in this ( until i found the plans cd )
>>>
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>>
>>>
>>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170916/1563116c/attachment.html>