[PSUBS-MAILIST] SeaQuestor CNC begins

[David Colombo via Personal_Submersibles]

Hey Brian,We evacuated the motorhome last night to my office. Left our
ranch this morning after the fire circled most of the northern outskirts of
the city. As we evacuated this morning with animals loaded and a caravan of
vehicles,  the fire was across the road and coming up the face of Calistoga
grade east. They did a hard close of Calistoga at Harville 20 min after we
left. At my office now getting organized, not knowing if the fire passed us
by or not, or if we will living in the motorhome for a while. At least all
of the family has evacuated and are safe.
On Oct 9, 2017 7:52 AM, "Brian Cox via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> David,  what's the deal with those fires up there?
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: Re: [PSUBS-MAILIST] SeaQuestor CNC begins
> Date: Sun, 8 Oct 2017 18:24:53 -0700
>
> Hey Brian, that's spell check for you. It's Sono Tube. Used for concrete
> forms, 8" od to 48" od.
> On Oct 8, 2017 6:08 PM, "Brian Cox via Personal_Submersibles" <
> personal_submersibles at psubs.org> wrote:
>
> David,    What's a "Sonoma tube"  ?
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: Re: [PSUBS-MAILIST] SeaQuestor CNC begins
> Date: Sun, 8 Oct 2017 12:23:32 -0700
>
> Hi Brian, all of the parts cut on the cnc are based on the Rhino model
> which based on actual thicknesses.  The expectation is that the 3/8"
> fiberglass exoskeleton when molded should fit over the plywood forms. Even
> the cutout is sized for the 36" x 3/8" hull. I will be using a 36" Sonoma
> tube which has a 3/8" wall thickness,  so the interior pilot console that
> has been fabricated out of ss, will be able to be relocated into the final
> hull when complete. At least that's the plan.
> On Oct 8, 2017 10:10 AM, "Brian Cox via Personal_Submersibles" <
> personal_submersibles at psubs.org> wrote:
>
> David,   Yeah, my whole design changed after doing a full scale mock up.
> After seeing one of Phil Nuyten's plywood mock ups in Vancouver it was very
> insightful.  However the plywood doesn't necessarily correspond to the
> actual dimensions of the outside of the sub because you need some strength
> to hold it together , so I made two mock ups, one for ergonomics for the
> inside and one for the outside dimensions.
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: [PSUBS-MAILIST] SeaQuestor CNC begins
> Date: Sun, 8 Oct 2017 00:20:27 -0700
>
> Hi Guys,
> We just CNC'd the station ribs for the full scale mock-up of the
> SeaQuestor. Nest step is to assemble the puzzle on a rolling platform to
> start all of the electrical and plumbing rough-ins.
>
> https://youtu.be/XiWSaSF6UT0
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> <https://maps.google.com/?q=804+College+Ave+Santa+Rosa,+CA.+95404+(707&entry=gmail&source=g>
> Santa Rosa, CA. 95404
> <https://maps.google.com/?q=804+College+Ave+Santa+Rosa,+CA.+95404+(707&entry=gmail&source=g>
> (707) 536-1424
> www.SeaQuestor.com
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171009/882057cb/attachment-0001.html>