[PSUBS-MAILIST] SeaQuestor CNC begins

[Alec Smyth via Personal_Submersibles]

That's the way to do it... if I were on day one of this endeavor, I would
start by becoming a CAD expert and then try to use all the CNC fabrication
techniques instead of my dinosaur methods. Great job David, I can't wait to
see this one come together!

Best,

Alec

On Sun, Oct 8, 2017 at 3:20 AM, David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Guys,
> We just CNC'd the station ribs for the full scale mock-up of the
> SeaQuestor. Nest step is to assemble the puzzle on a rolling platform to
> start all of the electrical and plumbing rough-ins.
>
> https://youtu.be/XiWSaSF6UT0
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171008/a179c6c7/attachment.html>