[PSUBS-MAILIST] New nose tank

[Alan via Personal_Submersibles]

Very good Brian,
how did you form it? I managed to split both my ambients fibreglass 
ballast tanks by making the bottom hole too small. The air couldn't
force the water out quick enough!
Alan 

Sent from my iPad

> On 11/07/2017, at 7:30 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
>                    Been making progress on my new nose take.   This tank is 6' long and tapers from 18" to 21"  that's because of the shape of the sub's front nose section.  I still need to put a bulkhead fitting for the vent and one for air injection.  I will also be putting some syntactic foam inside which I'm getting from Scott.    The tank is pretty strong as it is now but I may add another layer of fiberglass so it's a bit beefier.
>  
> Brian   
> <Fiberglass-tank7.jpg>
> <fiber-tank-8.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170711/dbac67e6/attachment.html>