[PSUBS-MAILIST] coax

[David Colombo via Personal_Submersibles]

Brian, Let me know, I'll take the the other 10 if you need to.

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com


On Fri, Jan 27, 2017 at 10:28 AM, Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> I have contacted the California rep for the blue globe company ,
> Conta-Clip The parent company is PFLITSCH in Germany.  The BlueGlobe is all
> metric
>
>
> There is a catalogue on this page:
>
> http://contaclipinc.com/products/range-of-products-us/cord-grips.html
>
> I am trying to order one of these cable compression fittings that will
> accommodate a 5mm coax cable and have a 1/2" npt male treads on the other
> side, they make the part the only problem is they want a minimum of 12
> units to bring in rather than just order one or two.  They are $12.00 a
> piece .  The rep for California is trying to pull some strings for me since
> I only need a couple.
>
>
> Here's the parent company:
>
>  https://www.pflitsch.de/en/cable-glands/
>
>
> Brian
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: Re: [PSUBS-MAILIST] coax
> Date: Fri, 27 Jan 2017 09:13:03 -0800
>
> Hi Emile,
> I have two questions. Does  the BG216 use an oring seal?  Are you placing
> a BG on each side of your thruhull plate? The thru hull plate I am using is
> 3/4" thick, so it appears that I have the thickness to accommodate one on
> each side.
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
>
>
> On Wed, Jan 25, 2017 at 11:20 AM, emile via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Brian,
>
>
>
> We always use Pflitsch Blueglobe  (BG 216 MS)  for cable 5 to 11 mm.
>
> They are officially rated for 15 Bar but the fail  at 80 bar single and
> 140 Bar back to back!
>
> Yes, just thread the cable tru. For a cable with a connector like a
> Humminbird sonar, you have to cut the cable.
>
>
>
> Br, Emile
>
>
>
> *Van:* Personal_Submersibles [mailto:personal_submersibles-
> bounces at psubs.org] *Namens *Brian Cox via Personal_Submersibles
> *Verzonden:* woensdag 25 januari 2017 19:56
> *Aan:* Personal Submersibles General Discussion
> *Onderwerp:* Re: [PSUBS-MAILIST] coax
>
>
>
> Hank,  When you interrupt the shielding like that it messes up the wave
> propagation .
>
>
>
> Emile,  Do those fitting essentially just squeeze the cable really
> tight?   Is there a manufacturer that is recommended?   My cable is 200
> thousandths ( 5mm) diameter thick, and is RG59     I guess I could just
> thread the cable through without cutting into it? No?
>
>
>
>
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.
> org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.
> org>
> Subject: Re: [PSUBS-MAILIST] coax
> Date: Wed, 25 Jan 2017 18:35:25 +0000 (UTC)
>
> Brian,
>
> I have made a two wire penetrator for coax, just but an adaptor that goes
> from coax to two wires.  Emile's plan is less work though.
>
> Hank
>
>
>
> On Wednesday, January 25, 2017 5:45 AM, hank pronk via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
>
> I was very surprised to receive a phone call on my cell sealed up inside
> Gamma.
>
> Hank
>
>
>
> On Wednesday, January 25, 2017 4:46 AM, Brian Cox via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
>
> Hi All,
>
>                   Been installing my ship to shore VHF marine radio.  what
> is a good way to run the coax thru without having to get the manufactured
> connectors,  Those things are kind of pricey !
>
>
>
>
>
> Brian
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170127/e2d746b5/attachment-0001.html>