[PSUBS-MAILIST] electrical connectors

[Cliff Redus via Personal_Submersibles]

Andre, rather than using the Subconn 4 pin bulkhead connector you speced (
HPBH4F/HPPBOF4M) you might want to consider using two of the 2 pin bulkhead
connectors like subconn BHB2F & BHB2M. The cost for these are a lot
cheaper. The 316-SS penetration disk I have on my boat has four machined
holes to accept four of these bulkhead penetrators,    For the thrusters
penetrators on my boat I ordered from McCarntey:

[image: Inline image 1]

Prices are in USD.


MacArtney in US is distributer for Subconn. Jon Wallace set this up with
MacArtney.  The contact who will give you the 20% Psub discount is

*Jacobo Aguilar*

*Head of Connectivity / Subconn.*

*MacArtney Inc. - Gulf of Mexico Operations*

*Office: +1 713-266-7575*

*Mobile: +1 713-504-1757*

*Email: jag at macartney.com <jag at macartney.com>*

*Website: www.macartney.com <http://www.macartney.com/>*

* Cliff*






On Mon, Feb 13, 2017 at 7:20 AM, André Eriksen via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi,
>
> Just got a quote on high power connectors (50A) from Subconn (HPBH4F/
> HPPBOF4M).
> 480 Euro (410 USD) for female+male connector.
>
> For 6 thrusters this will be a bit expensive.
> Where do you buy your high power connectors?
>
>
> Regards
> André E.
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170213/3fecefc2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 30237 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170213/3fecefc2/attachment-0001.png>